Klarstein 10011462 Bedienungsanleitung Seite 13

ventilation'. Please pay attention to the ventilation method when installation. See Pic 6
Vertical ventilation: See Pic 6A, please use tool take out the round cover before using, and the air can
be vented from top
horizontal ventilation: See Pic 6B, please use tool take out the round cover before using, and the air can horizontal ventilation: See Pic 6B, please use tool take out the round cover before using, and the air can
be vented from back. be vented from back.
The square air outlet for horizontal ventilation is not supplied. The square air outlet for horizontal ventilation is not supplied.
Installation instructions (10011462/10011483)
Warning: Failure to install the screws or fi xing device in accordance with these instructions may
result in electrical hazards.
Way one:
• The cooker hoods should be placed at a distance of 65-75cm from the
cooking surface for best effect.
• To install onto the wall drill 4 holes of Ø8mm on a suitable place according with the centre distance
of hole in the back of the cooker hood.
• Insert the nut into the holes.
• Insert the screws into the nuts and tight.
• Put up the cooker hood onto the fi xed screws.
• Then use the attached accessories with the goods to turn the screws into the two holes of inside
the hood, and then fi x the screw to tighten the hood onto the wall.
• Put the one way valve onto the cooker hood.
13