Herunterladen Inhalt Inhalt Diese Seite drucken

Installation Instructions - Klarstein 10011462 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für 10011462:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Special Hints on Safety
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or simi-
larly qualified persons in order to avoid a hazard.
• This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision
The instructions shall state the substance of the following:
• There shall be adequate ventilation of the room when the range hood is used at the same time as
appliances burning gas or other fuels
• There is a fire risk if cleaning is not carried out in accordance with the instructions;
• Do not flambé under the range hood; .
• CAUTION: Accessible parts may become hot when used with cooking appliances.
• The air must not be discharged into a flue that is used for exhausting fumes from appliances bur-
ning gas or other fuels.
• The cooker hood should be placed at a distance of 65~75cm above the cooking plane for best
effect.
• Regulations concerning the discharge of air have to be fulfilled.
Installation instructions(10011484)
Warning: Failure to install the screws or fixing device in accordance with these instructions may
result in electrical hazards.
Way one:
• The cooker hoods shall be placed at a distance of 65-75cm from the cooking surface. See Pic 1
• To install onto the wall drill 2 holes of Ø8mm on a suitable place according with the centre distance
of hole in the back of the cooker hood.
Insert the nut into the holes.
• Insert the screws into the nuts and tight. Put the cooker hood onto the tighten screws See Pic 2
Fix the cooker hood with safety screw, see Pic 4. The two safety vents are positioned on the back
casing, with diameter of 6mm.
• Put the one way valve onto the cooker hood.
11

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis