Selecting The Transmission Channel On The Receiver; Channel Mode Switch (4) - Conrad 75 17 85 Bedienungsanleitung

7.2 Selecting the Transmission Channel on the
Receiver
The receiver supplied can receive up to 4 wireless cameras, assuming those cameras are
appropriately suited. The individual transmission channels can be selected using the
"Camera Channel Selector" (1).
The "Camera Channel Status LED" (2) indicates which channel is currently selected (LED
is lit).

7.3 Channel Mode Switch (4)

Fig. A
There is a "Channel Mode Switch" (4) on the receiver which allows you to activate and
deactivate the transmission channels. The "Channel Mode Switch" (4) also allows you to
activate or deactivate the automatic transmission channel switching function.
Channel 3
Channel 4
DC5V
A/V
M
OFF
ON L
1 2 3 4
USB
29