Connecting The Headphones; Fitting And Using The Headphones; Switching Noise Cancellation On/O; Storing And Transporting The Headphones - Blaupunkt Comfort 112 Noise Cancelling Bedienungsanleitung

Connecting the headphones

The headphones can be connected to portable audio devices, stereo systems and
audio systems in airplanes.
u Connect the supplied audio cable with the headphone jack of the left earpiece.
Connection to audio devices with 3.5-mm jack socket
u Connect the headphones to the headphone jack of the audio source.
Connection to audio devices with 6.3-mm jack socket
u Connect the 6.3-mm audio adapter with the audio cable before connecting the
headphones with the audio source.
Connection to audio systems with dual socket in airplanes
u Plug the airplane adapter onto the audio cable before connecting the headphones
to the audio system.
Note:
If you want to use the headphones as pure noise protection, you do not need to con-
nect the headphone cable. To do so, switch on the noise cancellation.

Fitting and using the headphones

The headphones must t perfectly for high noise cancellation e ect, faithful music play-
back and comfortable wearing.
u Put on the headphones. When putting on the headphones, observe the markings L
and R to identify the left and right earpiece.
u Adjust the headphone band so that the ear cushions completely enclose the ear and
the headphones rests comfortably on the head.
u Switch on the audio device and start the playback. Ensure that the volume is set to a
low level.
u Adjust the volume with the volume control of the audio device.

Switching noise cancellation on/o

u Slide the switch on the left earpiece to the position ON.
The noise cancellation switches on and the power-on indicator illuminates in red.
u Use the ANC LEVEL control to set a comfortable noise cancellation e ect.
Note:
When the batteries become weaker, the noise cancellation does not work properly.
Replace the batteries with new ones.
u Push the switch to the position OFF.
The noise cancellation switches o and the power-on indicator goes out.
Note:
Switch the noise cancellation o after use to save the batteries.
14

Storing and transporting the headphones

You can store the headphones and the accessories in a space-saving way using the
supplied transport case and transport it safely. For this purpose, the headphones are
quipped with rotating earpieces.
u Disconnect the plug of the audio cable from the headphone jack.
u Rotate the earpieces by 90° before placing the headphones in the transport case.
Note:
The earpieces can be rotated in one direction only. Rotating in the wrong direction
may damage the headphones.

Warranty

We provide a manufacturer's warranty for products bought within the European Union.
For devices purchased outside the European Union, the warranty terms issued by our
respective responsible domestic agency are valid. The warranty terms can be called up
from www.blaupunkt.com.

Declaration of conformity

The Blaupunkt AudioVision GmbH & Co. KG declares that this product complies with
the basic requirements and the other relevant regulations of the directive 2004/108/EC.
The declaration of conformity can be found on the Internet under www.blaupunkt.com.
15