Inhaltsverzeichnis
Werbung
Before first Use
Unpack the pneumatic drill hammer and check all parts for any
damage in transit. Dispose of packaging materials or store it out
of reach of children. Plastic bags etc. may become a deadly toy
for children.
Use only tool bits with SDS-Plus coupler! If the shank of the tool
does not match the coupler on the machine, the tool must not be
used!
Inserting Tools
Attention! Unplug from the power supply before cleaning,
maintaining or when not in use.
1. Lightly grease the shaft of the drill
before inserting. Keep the guides
and grooves in the shaft clean.
2. To attach a drill or chisel, pull the
SDS Plus chuck (8) back and insert
the tool into the chuck.
The tool has a slot with which a
guide rail in the chick engages.
3. Slightly turn the tool while inserting
until the grooves and guides lock
into each other. When the locking
ring slides back into place, the tool
is locked into place. Before starting wok, check if the tool has
firmly locked into place. To remove the tool, pull back the
locking ring and pull the tool out of the chuck.
Operation
15
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
