Introduction; Intended Use; Features; Package Contents - Parkside PMNF 1350 B2 Originalbetriebsanleitung

WALL CHASER PMNF 1350 B2

Introduction

Congratulations on the purchase of your new appli-
ance. You have selected a high-quality product. The
operating instructions are part of this product. They
contain important information on safety, usage and
disposal. Before using the product, familiarise your-
self with all handling and safety guidelines. Use the
product only as described and for the range of ap-
plications specified. Please also pass these operating
instructions on to any future owner.

Intended use

The wall grinder (standard nomenclature: abrasive
cutting appliance), hereinafter referred to as the
appliance, is designed for making cuts or slits
(without the use of water) in firmly supported and
primarily mineral materials such as concrete or ma-
sonry, using the guide carriage and in combination
with an approved industrial dust extractor. Any
other usage of or modification to the appliance
is deemed to be improper and carries the risk of
serious personal injury. Not for commercial use.

Features

ON/OFF switch
Handle
Dust extraction adapter
Union nut
Blade guard
Locking flange (with thread)
Locking screw for the depth stop
Depth stop
Additional handle
Safety lock-out
Spindle lock
Roller
Reducer
Flange
Blotters
Face spanner
Hand chisel
Backing flange
│ GB │ IE │ NI
■ 2

Package contents

1 wall chaser
2 cutting discs (pre-fitted)
1 face spanner
1 dust extraction adapter (pre-fitted)
1 reducer (for use with the dust extraction adapter
and a dust extractor hose of ∅ 32 mm)
1 hand chisel
1 operating manual

Technical data

Input voltage:
Power consumption:
Rated speed:
Disc sizes Ø:
Central fixing bore:
Groove depth:
Groove widths:
Thread:
Protection class:
Weight:
Noise and vibration data:
The noise and vibration values have been
determined in accordance with EN 60745.
Sound pressure level L
pA
Uncertainty K :
pA
Sound power level L
WA
Uncertainty K :
WA
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 60745.
Details of vibration values (when cutting off a
concrete plate):
Main handle: a = 5.450 m/s
h
Uncertainty K = 1.5 m/s
Auxiliary handle: a = 4.737 m/s
h
Uncertainty K = 1.5 m/s
230 V ~ 50 Hz
(alternating current)
1350 W
n 9000 rpm
125 mm
22.23 mm
0–30 mm
min. 8mm to max. 26mm
M14
II / (double insulation)
approx. 4 kg
: 98.0 dB(A)
3 dB
: 109.0 dB(A)
3 dB
2
2
2
2
PMNF 1350 B2