Bosch ALS 25 Originalbetriebsanleitung Seite 12

OBJ_BUCH-2968-001.book Page 12 Wednesday, July 27, 2016 9:16 AM
12 | English
 Always direct the cable to the rear
away from the appliance.
 Use the machine only in the correct
orientation for its configuration. This
machine is not designed for use in-
verted during vacuum mode.
 Never operate the leaf blower/garden
vacuum with defective guards or
shields, or without safety devices, for
example collection bag in place.

Always ensure all handles and guards
supplied are fitted when using the
leaf blower/garden vacuum. Never at-
tempt to use an incomplete leaf blow-
er/garden vacuum or one with an un-
authorised modification.
 While operating the leaf blower/gar-
den vacuum always be sure of a safe
and secure operating position at all
times.
 Always be aware of your surround-
ings and stay alert for possible haz-
ards that you may not hear whilst op-
erating the leaf blower/garden
vacuum.

Do not over reach and keep your bal-
ance at all times.

Always be sure of your footing on
slopes.
 Walk, never run.

Keep all cooling air inlets clear of de-
bris.

Never blow debris in the direction of
bystanders.

Do not carry the machine by the ca-
ble.

The wearing of a face mask is recom-
mended.

Wear safety goggles.
F 016 L81 594 | (27.7.16)
 Do not modify this product. Unau-
thorized modifications may impair
the safety of your product and may
result in increased noise and vibra-
tion.
 Do not vacuum solid objects such as
big branches, broken glass, pieces of
metal and stones.

A worn fan or blower housing (chips,
cracks, nicks) may cause an in-
creased risk of injury from thrown for-
eign objects. If the blower housing is
damaged, consult the Bosch hotline.
Remove the plug from the socket:
– Whenever you leave the machine.
– Before checking, clearing a blockage
or working on the leaf blower/garden
vacuum.
– After striking a foreign object, inspect
the leaf blower/garden vacuum for
damage and make repairs as neces-
sary.
– If the leaf blower/garden vacuum
starts to vibrate abnormally check im-
mediately.
Connecting to the mains
 The voltage indicated on the rating
plate must correspond to the voltage
of the power source.
 We recommend that this equipment
is only connected into a socket which
is protected by a circuit-breaker that
would be actuated by a 30 mA residu-
al current.
 Only use or replace power supply ca-
bles for this unit which correspond to
the types indicated by the manufac-
Bosch Power Tools