TaoTronics TT-BH16 Bedienunganleitung Seite 6

How to Use
1. Charging
1) Connect the charging port with any USB
charging adapter or active computer USB port.
2) Charging will start automatically with the LED
indicator turning red.
3) The earphones are fully charged when the LED
indicator turns off.
2. Pairing
1) Make sure the earphones and your Bluetooth
device are next to each other (within 3 feet /
1 meter).
2) Press and hold the Multifunction Button for 5
seconds to bring the earphones into pairing mode
with the LED indicator ashing blue and red.
3) Activate the Bluetooth
and search for nearby Bluetooth
• For iOS: Settings > Bluetooth > On
• For Android: Settings >Bluetooth: On >
Scan for devices
4) Find "TaoTronics TT-BH16" in the search results. Tap
on the name to connect. Once connected,the
blue LED will ash twice every 5 seconds.
Note:
• If a PIN code is required for pairing, try "0000"
(four zeroes).
• The Bluetooth earphones can remember previously
paired devices. If you have previously paired the
function on your phone
®
connections:
®
earphones with a device, simply turn on your device
and the earphones (by pressing the Multifunction
Button for 3 seconds to turn on), they will connect
to the last connected device automatically
without going into pairing mode.
3. Pairing with two devices at the same time
Although you can pair with two devices, only one of
them can play music or make phone calls with the
headphone at any time. To pair with two devices:
1) Follow the previous instructions in the "Pairing"
section to pair the TT-BH16 with your rst device.
®
2) Turn off the Bluetooth
and follow the "Pairing" instructions again to pair
and connect to your second device.
3) With the Bluetooth
turned on, switch between the two paired devices
by pausing the music on the rst device and
playing music on the second device.
4. How to Wear
Please wear the earphones as shown in the diagram:
function of your rst device
®
function on both devices
®
07/08