Mounting Instructions - Sony DG805FLM Bedienungsanleitung

2. Mounting Instructions

. Except when using a flat feeler, it is recommended to either attach a nominal 2.5 spring
washer or use a screw lock to prevent loosening of the feeler
. Use the fitting to be attached to the gauging probe as shown in Fig.3. Especially, the
length of the M4 screw section to be inserted into the gauging probe should be 4.5 mm
(0.18") or less. If the screw is too long, the gauging probe may be damaged.
. Fastening torque of the measuring feeler: 0.05 to 0.06 N.m.
Insert into
DG805FLM/DG805FLE/
DG810FLM/DG810FLE
2
(E)
O ring
M4
4.5 mm/0.18" or less
Fig.3 Dimensions of Fitting
To the Orifice
tube
DG805FLM/DG805FLE
DG810FM/DG810FE
DG810FLM/DG810FLE