Renkforce W4S Bedienungsanleitung Seite 3

Operating Instructions
Mobile scanner "wireless edition"
Item No. 1497721
Intended use
Use the mobile scanner as a portable scanning device. It is also suitable for master copies that cause problems with a normal
flat-bed scanner, such as books or bound documents that have several pages. Just move the scanner over the document and
the scanned image is available in either JPEG or PDF format on an inserted microSD card. You then read out the stored data
on the computer via USB (USB cable included).
The "Directscan" application is available for Apple iOS devices (iPhone, iPod touch, iPad) and allows direct scanning and
transfer of documents to your Apple product via WLAN. The "Magicscan" software included allows direct processing of the
scanned documents on a Windows computer. Power is supplied by four AAA batteries or via a USB power supply.
®
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product for purposes other
than those described above, the product may be damaged. In addition, improper use can cause hazards such as short
circuiting, fire, electric shock etc. Read the instructions carefully and keep them. Make this product available to third parties
only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names andproduct names are
trademarks of their respective owners. All rights reserved.
Delivery content
• Scanner • USB cable (180 cm)
• Software CD • Storage pouch
Up-to-date operating instructions
Download up-to-date operating instructions via the link www.conrad.com/downloads or scan the displayed QR
code. Follow the instructions on the website.
Symbol explanation
Das Symbol mit dem Ausrufezeichen im Dreieck weist auf wichtige Hinweise in dieser Bedienungsanleitung hin,
die unbedingt zu beachten sind.
The arrow symbol indicates special hints and operating information.
Software
Important! The software included on the supplied CD is large. For this reason, it takes much more time for
newer Windows versions (starting from Windows
®
more minutes!
Therefore, after inserting the CD into your DVD drive, wait until a message from the installer appears on your
screen. During this period, do not remove the CD from the DVD drive.
Safety instructions
Read the operating instructions carefully and especially observe the safety information. If you do not
follow the safety instructions and information on proper handling in this manual, we assume no liability
for any resulting personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General
• Keep the product and the wiring away from electromagnetic sources of interference.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become dangerous playing material
for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture,
flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
• Also observe the safety and operating instructions of any other devices which are connected to the product.
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a qualified shop.
• If you have any questions that are not answered in these operating instructions, please contact our technical
support centre or consult a professional.
a) Batteries/rechargeable batteries
• Correct polarity must be observed while inserting the batteries.
• Batteries should be removed from the device if it is not used for a long period of time to avoid damage
through leaking. Leaking or damaged batteries might cause acid burns when in contact with skin, therefore
use suitable protective gloves to handle corrupted batteries.
• Batteries must be kept out of reach of children. Do not leave the battery lying around, as there is risk, that
children or pets swallow it.
• All the batteries should be replaced at the same time. Mixing old and new batteries in the device can lead to
battery leakage and device damage.
• Never recharge non-rechargeable batteries. There is a risk of explosion.
• Operating instructions
7) until the software installer responds. It can take up to 5 or
®
Operating elements
1 COLOR/MONO/JPG/PDF button
2 Mini-USB port
3 SCAN button
FORMAT button
4
TIME SET button
5
6 Battery compartment cover
Short overview
Pos Component / display Display function / action
A Battery display Replace batteries if display is empty
B Colour mode Colour mode, black/white "BW" or colour "COLOR"
C Resolution "HI" (900 dpi) / "MI" (600 dpi) / "LO" (300 dpi)
D File number / image format File number on microSD card / image format PDF or JPEG
Control lamp ERR
E [shines] Batteries empty / error while scanning
F [shines] WLAN transmission taking place, WLAN setting taking place
Control lamp
Control lamp SCAN
G [shines] Scan procedure is being carried out
H microSD card display [shines] microSD card available / "full" with full microSD card
Inserting/replacing batteries
• Push the battery compartment cover (6) outward and remove it.
• Insert four type AAA batteries in the battery bays. Note the polarity markings in the battery bays. Slide the battery
compartment cover on until it engages.
Switching on/off
• Press and hold down the SCAN button (3) for ca. 2 seconds to switch the scanner on. The display (12) lights up.
• To switch off, hold the SCAN button down for approximately 3 seconds. The display will go out. If there is no input during battery
operation (and there is no WLAN connection) for ca. 3 minutes, the scanner will automatically switch off.
Inserting and formatting a microSD card
• Insert a microSD card (max. 32 GB) in the microSD card slot (7) until it engages. Note the direction as indicated on the
scanner next to the microSD card slot.
• With the battery compartment cover open, push the FORMAT button (4) with a thin blunt object while the scanner is switched
on. "F" appears in the display (12). Confirm the formatting process with the SCAN button. The microSD card is being
formatted. Caution! All data will be deleted.
• For later removal, switch the scanner off (prevent data loss) and push the microSD card in until it releases.
Setting the time stamp
A time stamp in the file name is automatically added to the scanned files. Setting the time stamp:
• Remove the battery compartment cover. Press the TIME SET button (5) with a thin blunt object while the scanner is switched
on. The year flashes in the display.
• Use the COLOUR/MONO/JPG/PDF (1) (up) and RESOLUTION (10) (down) buttons for navigation. Confirm the inputs with
the SCAN button and jump to the next setting item. Leave the menu with the TIME SET button. Setting sequence:
Jahr Monat Tag Stunden (24h-Format)
• Note that the time setting will be lost if the batteries are removed.
Setting the resolution
• Turn the scanner on. Set the desired resolution with the RESOLUTION button (HI = 900 dpi, MI = 600 dpi, LO = 300 dpi).
Note the resolution display (C).
• Note that a higher resolution lengthens the scanning process and results in a bigger file size.
Choosing the colour mode and file format
Turn the scanner on. Set the colour mode and file format with the COLOUR/MONO/JPG/PDF button. The settings are shown
in the display (B, D) as follows:
"JP 9 / COLOUR" – JPEG image format in colour; PDF/COLOUR – PDF image format in colour
"JP 9 / BW" – JPEG image format in black & white; "PDF / BW" – PDF image format in black and white
Scanning a document
• Turn the scanner on. Prepare the desired document. Make sure that the surface of the document is clean and free of dust
and objects that could scratch or otherwise damage the imaging bar (9).
• Press the SCAN button. The SCAN control lamp (G) lights up. Guide the scanner carefully and slowly over the document.
Make sure that the guide rollers (8) are touching. When you reach the end of the document, press the SCAN button to store
the image on the inserted microSD card.
• If an error occurs during scanning (e.g., moving too quickly while scanning), the ERR control lamp (E) lights up. Repeat
the scanning procedure.
Scanning via WLAN with iOS app
a) Installing the application
iOS devices (iPhone, iPod touch, iPad) must have an iOS version of at least iOS 5.1. Information regarding
applications: Note that changes and improvements to the application may take place and that updates will
therefore be made available to you at the appropriate time.
While the ad-hoc WLAN is connected, no connection to the Internet can be established.
7 microSD card slot
8 Guide roller
9 Imaging bar
10 RESOLUTION button
11 SET-ON-OFF switch
12 Display
Minuten Jahr