Herunterladen Inhalt Inhalt Diese Seite drucken

Yamaha YTS-F500 Installationsanleitung Seite 12

Inhaltsverzeichnis

Werbung

ASSEMBLING/MONTAGE
4-1
English
4 Installing the glass
4-1
Prepare for installing the glass.
1 Stick
on
as shown in the illustration above.
2 Tighten
(2 screws) temporarily halfway into
shown in the illustration above.
3 Stick
on
.
4 Attach
with
Note
Be careful not to scratch
4-2
Install the glass.
1 Apply
to the floor stand as shown in the illustration
above.
2 Set
between
Make sure the direction of the glass table matches that in
the illustration.
3 Adjust the position of
4 Secure
with
Notes
• Be careful not to tighten screws too much as the glass table may
crack.
• Use a short Phillips screwdriver when you tighten
8
En/Fr
(4 screws).
with the bracket.
and
(refer to the illustration above).
so that it is in the middle.
you tightened temporarily in 4-1-2.
.
4-2
Français
4 Installation de la vitre
4-1
Préparez-vous à installer la vitre.
1 Assemblez
ci-dessus.
as
2 Serrez provisoirement
comme indiqué dans l'illustration ci-dessus.
3 Assemblez
4 Fixez
Remarque
Veillez à ne pas érafler
4-2
Installez la vitre.
1 Appliquez
l'illustration ci-dessus.
2 Placez
ci-dessus). Assurez-vous que l'orientation de la vitre
correspond à celle de l'illustration.
3 Réglez la position de
4 Fixez
l'étape 4-1-2.
Remarques
• Veillez à ne pas trop serrer les vis, au risque de fissurer la vitre.
• Utilisez un tournevis court Phillips pour serrer
Sticker
Autocollant
et
comme indiqué dans l'illustration
(2 vis) à mi-course dans
et
.
avec
(4 vis).
avec le support.
sur le pied de sol comme indiqué dans
entre
et
(reportez-vous à l'illustration
pour qu'il se trouve au milieu.
avec
que vous avez provisoirement serré à
,
.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis