Personal Safety - Parkside PBH 1500 C3 Originalbetriebsanleitung

f) If operating a power
GB
IE
tool in a damp location
is unavoidable, use a
residual current device
(RCD) protected supply.
Use of an RCD reduces
the risk of electric shock.

3. Personal safety

a) Stay alert, watch what
you are doing and use
common sense when
operating a power
tool. Do not use a
power tool while you
are tired or under the
influence of drugs,
alcohol or medication.
A moment of inattention
while operating power
tools may result in serious
personal injury.
b) Use personal protective
equipment. Always
wear eye protection.
Protective equipment
such as dust mask, non-
skid safety shoes, hard
hat, or hearing protection
20
used for appropriate
conditions will reduce
personal injuries.
c) Prevent unintentional
starting. Ensure the
switch is in the off
-position before
connecting to power
source and/or battery
pack, picking up or
carrying the tool.
Carrying power tools with
your finger on the switch
or energising power tools
that have the switch on
invites accidents.
d) Remove any adjusting
key or wrench before
turning the power tool
on. A wrench or a key
left attached to a rotating
part of the power tool
may result in personal
injury.
e) Do not overreach.
Keep proper footing
and balance at all
times. This enables better
control of the power tool
PBH 1500 C3