Introduction; Proper Use; Depicted Components; Package Contents - Parkside PBH 1500 C3 Originalbetriebsanleitung

ROTARY HAMMER PBH 1500 C3

Introduction

Congratulations on the purchase
of your new appliance. You have
selected a high-quality product. The
operating instructions are part of this
product. They contain important information
about safety, use and disposal.
Before using the product, familiarise yourself
with all operating and safety instructions.
Use this product only as described and only
for the specified areas of application. Please
also pass these operating instructions on to
any future owner(s).

Proper use

The PBH 1500 C3 rotary hammer (hereinafter
appliance) is suitable for:
• Hammer-drilling into brickwork, concrete
and stone
• Chiselling into concrete, stone and plaster
• Drilling into stone, wood and metal
Any other usage of or modification to the
appliance is deemed to be improper usage
and carries the risk of serious personal
injury.
The manufacturer accepts no responsibility
for damage(s) arising out of usage contrary
to the instructions specified below.
The appliance is not meant for commercial
use.

Depicted components

Function selector
Function selector release switch
On/off switch
Hammer switch
Rotational speed preselector adjusting
wheel
Additional handle
Tool holder with dust protector cap
Locking collar
Wing screw
Depth stop
Wheel-rim chuck
Chuck key
PBH 1500 C3

Package contents

1 rotary hammer PBH 1500 C3
1 additional handle
3 drill bits (see fig. B)
1 flat chisel (see fig. B)
1 pointed chisel (see fig. B)
1 depth stop
1 wheel-rim chuck (see fig. A)
1 chuck key (see fig. A)
1 carrying case
1 operating manual

Technical details

Nominal power
consumption:
Rated voltage:
Idle speed:
Hammer frequency:
Drilling capacity:
Protection class:
Noise and vibration data:
Noise measurement determined in
accableance with EN 60745. The A-rated
noise level of the tool is typically:
Sound pressure level:
Uncertainty K:
Sound power level:
Uncertainty K:
1500 W
230 - 240 V~ 50 Hz
n 0–750 min ¯
0
0–3900 min ¯
max. 13 mm for steel
max. 40 mm for wood
max. 32 mm for concrete
II/
96.8 dB(A)
3 dB
107.8 dB(A)
3 dB
17
GB
IE