Herunterladen Inhalt Inhalt Diese Seite drucken

Original Accessories/Additional Equipment; Information On Saw Blades - Parkside PSTK 800 A1 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für PSTK 800 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 51
After completing your work, switch the electric
tool off and do not pull the saw blade
of the cut until the tool has come to a standstill.
This avoids kickbacks, and allows you to put
the tool down safely.
Only use undamaged saw blades that are in
perfect working order. Bent and blunt saw blades
can break or cause a kickback.
Do not try and slow the saw blade
after switching off by applying lateral pressure.
The saw blade
can be damaged, break or
cause a kickback.
Immobilise the workpiece securely. Use clamps/
vices to hold the workpiece firmly. This is much
safer than simply holding it in your hand.
Always run the power cord away from the
appliance to the rear.
Never work on moistened materials or wet
surfaces.
Hazards caused by dust! When working for
extended periods on wood and, in particular,
materials that produce dusts that are hazardous
to health, connect the appliance to an appropri-
ate dust extraction appliance.
Wear a dust mask.
Ensure there is sufficient ventilation.
WARNING! Protect yourself from
laser radiation!
LASER
2
P max.: < 1 mW • : 650 nm • EN 60825-1:2014
Never look directly into the laser beam or into
the opening from which it emerges.
PSTK 800 A1
WARNING!
out
Looking at a laser beam through optical
instruments (e.g. magnifying glasses etc.)
can cause eye injuries.
Caution! If operating and adjustment equip-
ment is used or procedures other than those
specified here are carried out, this may result
in hazardous radiation exposure.
down
Never aim the laser beam at reflective surfaces,
people or animals. Even brief visual contact
with a laser beam can result in eye injuries.
Original accessories/additional
equipment
Only use the accessories and additional
equipment that are specified in the operat-
ing instructions and are compatible with
the appliance.

Information on saw blades

The Parkside basic equipment includes saw blades
for use with wood and metal.
3 saw blades for general wood cuts
1 saw blade for light metals up to 3 mm
NOTE
You can also use any other saw blades pro-
vided they are fitted with a suitable mounting
(single-lug shank).
Saw blade type
suitable
GB
unsuitable
5

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

270762

Inhaltsverzeichnis