Yamaha QL1 Referenzhandbuch Seite 235

 DELAYER.
One input, two output delay and early reflections effects in series.
Parameter Range
DELAY L 0.0–1000.0 ms Left channel delay time
DELAY R 0.0–1000.0 ms Right channel delay time
FB. DLY 0.0–1000.0 ms Feedback delay time
Feedback gain (plus values for normal-phase feedback, minus values for
FB. GAIN –99 to +99%
reverse-phase feedback)
HI. RATIO 0.1–1.0 High-frequency feedback ratio
Delay and early reflected delay balance
DLY.BAL 0–100%
(0% = all early reflected delay, 100% = all delay)
HPF THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
S-Hall, L-Hall, Random,
TYPE Type of early reflection simulation
Revers, Plate, Spring
ROOMSIZE 0.1–20.0 Reflection spacing
LIVENESS 0–10 Early reflections decay characteristics (0 = dead, 10 = live)
INI. DLY 0.0–500.0 ms Initial delay before reverb begins
DIFF. 0–10 Spread
DENSITY 0–100% Reflection density
ER NUM. 1–19 Number of early reflections
SYNC OFF/ON Tempo parameter sync on/off
*1
NOTE L Used in conjunction with TEMPO to determine left channel DELAY
NOTE R Used in conjunction with TEMPO to determine right channel DELAY
*1
NOTE FB Used in conjunction with TEMPO to determine feedback DELAY
*1
*1.
 DELAY+REV
One input, two output delay and reverb effects in parallel.
Parameter Range
DELAY L 0.0–1000.0 ms Left channel delay time
DELAY R 0.0–1000.0 ms Right channel delay time
FB. DLY 0.0–1000.0 ms Feedback delay time
Feedback gain (plus values for normal-phase feedback, minus values for
FB. GAIN –99 to +99%
reverse-phase feedback)
DELAY HI 0.1–1.0 Delay high-frequency feedback ratio
Delay and reverb balance
DLY/REV 0–100%
(0% = all delay, 100% = all reverb)
HPF THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
REV TIME 0.3–99.0 s Reverb time
INI. DLY 0.0–500.0 ms Initial delay before reverb begins
REV HI 0.1–1.0 High-frequency reverb time ratio
DIFF. 0–10 Spread
DENSITY 0–100% Reverb density
Description
(Maximum value depends on the tempo setting)
Description
Parameter Range
SYNC OFF/ON
*1
NOTE L
NOTE R
*1
NOTE FB
*1
*1.
 DELAYREV
One input, two output delay and reverb effects in series.
Parameter Range
DELAY L 0.0–1000.0 ms
DELAY R 0.0–1000.0 ms
FB. DLY 0.0–1000.0 ms
FB. GAIN –99 to +99%
DELAY HI 0.1–1.0
DLY.BAL 0–100%
HPF THRU, 21.2 Hz–8.00 kHz
LPF 50.0 Hz–16.0 kHz, THRU
REV TIME 0.3–99.0 s
INI. DLY 0.0–500.0 ms
REV HI 0.1–1.0
DIFF. 0–10
DENSITY 0–100%
SYNC OFF/ON
*1
NOTE L
NOTE R
*1
NOTE FB
*1
*1.
16
Description
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine left channel DELAY
Used in conjunction with TEMPO to determine right channel DELAY
Used in conjunction with TEMPO to determine feedback DELAY
(Maximum value depends on the tempo setting)
Description
Left channel delay time
Right channel delay time
Feedback delay time
Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
Delay high-frequency feedback ratio
Delay and delayed reverb balance
(0% = all delayed reverb, 100% = all delay)
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Spread
Reverb density
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine left channel DELAY
Used in conjunction with TEMPO to determine right channel DELAY
Used in conjunction with TEMPO to determine feedback DELAY
(Maximum value depends on the tempo setting)
Data List