Setting Up And Connecting The Player; Operation - Monacor CD-112/BT Bedienungsanleitung

3 Applications
The CD / MP3 player CD-112 / BT with Bluetooth
receiver is suitable for versatile PA applica-
tions (e . g . in theatres, pubs or waiting rooms)
and offers special features, e . g . continuous
repeat, random replay, MP3 replay of USB
storage media and SD / MMC memory cards
(32 GB max .)* .
It is able to play audio CDs, audio CDs you
have burnt yourself (audio CD-R) and CDs with
titles in MP3 format . However, problems may
occur when replaying rewriteable CDs (CD-RW)
depending on the type of CD, the CD burner
and the burning program used .
* Note: Due to the large number of storage device
manufacturers and device drivers, it cannot be guar-
anteed that all storage media are compatible with
the CD-112 / BT .
4 Deactivating the Automatic
Start Function
The CD player is provided with an automatic
start function: After switching on the unit and
reading in a sound carrier (CD, USB flash drive
or memory card) the replay of the first title
will start automatically . If you do not wish the
unit to start automatically [replay will not start
before the button PLAY/ PAUSE (10) is pressed],
deactivate the automatic start function .
WARNING To make this modification, the
unit must be opened by skilled
personnel only . Inexpert han-
dling may result in electric shock!
Always disconnect the mains plug from
the socket before opening the unit!
On the PCB with the power supply unit and the
audio output jacks there is a jumper (see arrow
in fig . 5) . The automatic start function is acti-
vated when the jumper is in the position AUTO
PLAY . To deactivate the function, re arrange the
jumper to the position MANUAL PLAY .
5 Setting Up and Connecting
the Player
The player is designed for installation into a rack
(482 mm / 19"); however, it can also be placed
as desired as a desktop unit . For rack installa-
tion, 1 rack space (RS = 44 .45 mm) is required .
Prior to making or changing any connections,
switch off the CD-112 / BT and the units to be
connected .
1) Three line level outputs are available to
route the audio signals to the subsequent
unit (e . g . mixer or amplifier):
PRIORITY OUT (21)
At this output, either the signal of the
Bluetooth receiver or, if no signal is re-
ceived or if the replay has been set to
pause, the signal of the CD / MP3 player
is present .
BLUETOOTH OUT (22)
for the signal of the Bluetooth receiver
CD PLAYER OUT (23)
for the signal of the CD / MP3 player
2) Connect the mains cable provided to the
mains jack (24) first and then to a mains
socket (230 V/ 50 Hz) .

6 Operation

Switch on the player with the POWER switch (1) .
The display (5) will show
Welcome
First the player will read the CD . If no CD
has been inserted, the player will read the USB
flash drive . If no USB flash drive has been con-
nected, the player will read the SD / MMC mem-
ory card . If no memory card has been inserted,
the display will show NO DISC
6.1 Remote control
1) To insert the batteries (2 × 1,5 V, size AAA),
remove the battery compartment cover on
the rear side of the remote control . Insert
the batteries as indicated in the battery
compartment . Close the compartment with
the cover .
If the remote control is not in use for a
longer period of time, remove the batter-
ies to prevent any damage due to battery
leakage .
2) When you press a button on the remote
control, always direct the remote control
towards the sensor IR (7) . There must be
no obstacles between the remote control
and the sensor .
3) If the range of the remote control decreases,
the batteries are discharged and must be
replaced .
Discharged batteries must not be
placed in the household waste; al-
ways take them to a special waste
disposal, e . g . collection container at
your retailer .
6.2 Replaying music titles
1) Insert a CD with the lettering facing up into
the slot (4) until it is pulled in automatically
and / or
connect a USB flash drive to the USB port
(6) or connect a hard disk (with individual
power supply, if required) to the USB port
and / or
insert an SD/MMC memory card into the
slot SD / MMC CARD (2), the notched cor-
ner of the card facing up . To remove the
card, slightly push it in to eject the card
from the slot .
2) Select the sound carrier (CD, USB flash drive,
memory card) with the button FUNC (19),
if necessary .
3) After reading in the sound carrier, the first
title will start automatically . However, if
the automatic start function has been
deactivated (chapter 4), press the button
PLAY/ PAUSE (10) to start the first title . To
select other titles see chapter 6 .3 .
4) While replaying, the upper line of the dis-
play will show the replay symbol  on the
right . The lower line will show the number
(TR ...) of the current title and the time al-
ready played of the title (min . : sec .) . At the
far right, MP3 is shown for titles in
format or for standard audio CDs .
CDA
5) For MP3 files, the following additional in-
formation will scroll in the upper line:
File – ...
Title – ...
Artist – ...
Album – ...
Note: If an information is not available, the dis-
play will show
To activate / deactivate this information
.
scrolling through the line, press the button
ID3 (28) .
6) When you press the button DISPLAY (26)
on the remote control, various information
for MP3 files will be displayed in the lower
line of the display:
.
basic setting
The lower line will show the title number
and the time already played of the title .
first actuation of button
The file name will be displayed .
second actuation of button
The number of folders and the number
of titles will be displayed .
third actuation of button
return to basic setting
7) Press the button PLAY/ PAUSE to switch be-
tween replay and pause . In the pause mode,
the pause symbolwill be inserted and the
time indication will flash .
8) To stop the replay, press the button STOP
(9) . The second line of the display will show:
for standard audio CDs
– the number of titles (TR ...)
– the total playing time (min .: sec .)
for audio carriers with MP3 files:
– the number of folders
– the number of titles
9) To eject the CD, press the button EJECT (11) .
The display will show
be ejected and can be removed . If the CD
is not removed from the slot, the CD player
will pull it in again automatically after ap-
prox . 10 seconds .
6.3 Title selection
6.3.1 Direct selection of the title number
For direct selection of a title, enter its number
with the numerical keys (3) . To start the title,
press the button PLAY/ PAUSE (10) .
Examples:
Title number Keys
4
27
135
Note: The player will arrange MP3 titles as follows:
1 . all titles without folder in the ROOT directory
2 . all titles in folders in the ROOT directory
3 . all titles in subfolders, etc .
The titles and folders will not be arranged in alpha-
betic order, but can be easily found with the search
function ( chapters 6 .3 .3 and 6 .3 .4) .
☞
6.3.2 Skipping titles
in forward / reverse direction
To skip one title or several titles in forward or
reverse direction, briefly press the button CUE
or REV (8) [repeatedly] .
MP3
Button CUE: to skip to the next title
Button REV: to return to the beginning of the
title currently playing . Each time the button
REV is pressed again, the unit will go back one
title at a time .
Note: Only press the buttons REV and CUE briefly,
longer actuation will result in fast forward or reverse .
instead of a name .
Unknown
EJECT , the CD will
4, PLAY/ PAUSE
2, 7, PLAY/ PAUSE
1, 3, 5, PLAY/ PAUSE
9