Led Panel - Renkforce 1406474 Bedienungsanleitung

G Operating instructions

LED panel

Item no. 1406474 (595 x 595 mm, 36 W, warm white)
Item no. 1406475 (595 x 595 mm, 36 W, cold white)
Item no. 1406476 (620 x 620 mm, 36 W, warm white)
Item no. 1406477 (620 x 620 mm, 36 W, cold white)
Intended use
The LED panel is intended for illuminating indoor areas; it may be installed and used only in
dry, enclosed indoor rooms. The product is intended for suspension at the ceiling where it is
hung up by means of four steel cables (included in the delivery).
Please read the operating instructions carefully and do not discard them. Observe all safety
information and other information in these operating instructions.
Any use other than that described above could lead to damage to the product and involves
a risk of short circuits, fire, electric shock, etc.
This product complies with the applicable National and European requirements. All names
of companies and products are the trademarks of the respective owners. All rights reserved.
Package contents
• LED panel
• LED driver with power cable
• 4x installation sets (holders/steel ropes)
• mounting material for the LED driver (2x screws, 2x wall plugs)
• 4x cable spin clips
• 5x cable ties
• Operating instructions
Up-to-date operating instructions:
1. Open www.conrad.com/downloads in a browser or scan the dis-
played QR code.
2. Select document type and language and enter the item number
into the search field. After submitting the query you can download
displayed records.
Explanation of symbols, labels
The lightning symbol inside a triangle is used when there is a potential risk of
personal injury, such as electric shock.
This symbol indicates specific risks associated with handling, operation or use.
The "arrow" symbol indicates special tips and operating information.
The product is only intended to be placed and used in dry, enclosed indoor areas;
it must not get damp or wet.
The product is not dimmable.
The LED driver complies with safety class II.
The LED panel is constructed according to safety class III.
This symbol indicates a short-circuit proof safety transformer.
The LED driver is an independent converter (electronic transformer, suitable for
external operation of lights without additional safety measures or covers).
tc 75 °C The LED can reach a max. housing temperature of +75 °C during operation.
PRI Input; for connecting to the mains voltage
SEC Output; for connection to the LED panel
Observe the operating instructions!
Safety instructions
Read the complete operating manual carefully before using the product, as it
contains important information about the correct installation and operation.
Damage due to not following these operating instructions will void the warran-
ty! We do not assume any liability for any resulting damage!
We do not assume any liability for personal injuries and material damages
caused by the improper use or non-compliance with the safety instructions! In
such cases, the warranty will be null and void!
• Unauthorised conversion and/or modification of the product is not allowed for
safety and approval reasons (EC).
• The product is not a toy and must be kept out of the reach of children! There is
risk of a life-threatening electric shock! Install the product out of the reach of
children.
• The product may be installed and used only in dry indoor spaces; it must not get
damp or wet. There is a risk of a life-threatening electric shock!
• Do not use this product in rooms that are under adverse environmental condi-
tions where combustible gases, vapours or dust are or may be present! There
is a danger of explosion!
• Use the product only when it is firmly and steadily mounted.
• The LED driver must only be operated with the mains voltage of the public
mains supply.
• The mains socket used to connect the LED driver must be easily accessible;
alternatively, it must be possible to disconnect all poles from the mains voltage
(e.g. earth leakage ground breaker).
• The product must not be exposed to extreme temperatures, direct sunlight,
high dust occurrence, strong vibrations or heavy mechanical stress.
• Do not attach any items (e.g. decorations) to the LED panel and its holder.
• Protect the power cable of the LED driver (and also the low-voltage cable
between LED driver and LED panel) from sharp edges and other mechanical
impacts; do not bend it.
• Only use the enclosed LED driver to operate the LED panel. Otherwise, the
product will be damaged.
• Caution, LED light:
Do not look directly into the LED light!
Do not look directly or with optical instruments into the light!
• If it can be assumed that safe operation is no longer possible, the product must
be turned off and precautions must be taken to ensure that it is not used unin-
tentionally. After this, arrange for an expert to check the product.
Safe operation can no longer be assumed if:
- the product shows visible signs of damage
- the product does not work at all or works poorly (where there is flickering
light, leaking smoke or a smell of burning, audible crackling noises, or discol-
ouration of the product or to adjacent surfaces)
- the product was stored under unfavourable conditions
- it was exposed to heavy loads during transport
• Do not leave packaging material carelessly lying around, since it could become
a dangerous plaything for children.
• In commercial institutions, the accident prevention regulations of the Employ-
er's Liability Insurance Association for Electrical Systems and Operating Facil-
ities are to be observed!
• If you have any questions that are not answered in this manual, please contact
our technical service or other specialist.
Installation and connection
Please consult the section: "Safety instructions"!
a) Hanging the LED panel with the steel ropes included
Only mount the LED panel on a stable surface, e. g. concrete ceiling. Use a mount-
ing material suited to the surface.
Choose the installation location carefully if you want to install more than one LED
panel (for instance, when lighting a large entrance area or somewhere similar).
• The LED panel is hung up at the ceiling using four steel cables. For this purpose, four
suitable installation sets are included.
Each installation set consists of a steel rope (can be shortened to any length), a ceiling
mounting and holder for the LED panel.