Sharp CE-LK1P Bedienungsanleitung Seite 14

(2) Sending a File to the EL-94xx/96xx
NOTE: Group files, Text files, TIFF files, and Bitmap files cannot be sent to the EL-94xx/
96xx.
1. Turn on the EL-94xx/96xx.
2. Select the Send... from the Link menu.
The Send File screen is displayed.
3. Specify the kind of drive, folder, and file, then select the file to be sent from the file
list, and click on the Select button.
The selected file is displayed on the File Selected column.
4. Click on the OK button.
The Sending screen is displayed on the PC screen to start sending.
5. After the completion of sending, the initial screen returns.
3 Making a Backup
All data of the EL-94xx/96xx can be backed up to the disk, and the backed up data
can be restored to the EL-94xx/96xx.
(1) Making a Backup of All Data
1. Turn on the EL-94xx/96xx.
2. Select the Receive... from the Link menu.
The Receive File screen is displayed.
3. Specify the kind of drive, folder, then select "backup.g*b" from the file list, and click
on the Select button.
The selected "backup.g*b" is displayed on the File Selected column.
4. Click on the OK button.
The receiving screen is displayed on the PC screen to start receiving, and then all
data of the EL-94xx/96xx will be backed up.
(2) Sending Backup Data to the EL-94xx/96xx
NOTE: All the contents saved in the EL-94xx/96xx immediately before this are erased.
Perform the same procedure of "(2) Sending a file to the EL-94xx/96xx" on this page
to send the back-up file (backup.g*b) to the EL-94xx/96xx.
12