Specifying Model Type; Creating And Saving A New Program - Sharp CE-LK1P Bedienungsanleitung

Before using the PC LINK functions, specify the Model Type (EL-9400,EL-9450,
EL-9600/9650) of your calculator.
Specifying the Model Type allows the file extension, the Key Board layout of the View
menu, and the command listing of the Func Table menu to be set to the contents of
your calculator.
1. Select the Model Type from the Tools menu.
The Model Type listing is displayed.
2. Click on the same Model as your calculator.
(While using EL-9600c, select "EL-9600/9650".)

Creating and Saving a New Program

1 Creating a New Program
NOTE: Only programs can be created.
1. Select the New from the File menu.
The Newly-Edited screen is displayed.
2. Enter a program name in Title:
3. Enter a program.
(For details on entering a program, refer to "Using Edit Functions" on page 14.)
2 Saving a Created Program
1. Select the Save As... from the File menu.
The Save As screen is displayed.
2. Specify the drive and folder, and then enter the file name and extension.
The extension is different depending on your calculator.
3. Click on the OK button.
The created program is saved as a new program file with the contents specified in
2.
* Alphanumeric characters can be used for file names. If a program file stored with a file
name that consists of non-alphanumeric characters is sent to the EL-94xx/96xx, the
file name may change.
10

Specifying Model Type