Connections And Control Elements; Operating Modes - Conrad 98 91 96 Bedienungsanleitung

b) Connections and Control Elements
SIM-card slot Card slot for an activated SIM card
2.4G ANT Connection for the WLAN-aerial
RESET Button to reset the router to factory settings
WPS Button to activate the WPS function
LAN1/LAN2 RJ45 network port. Devices like PCs or network drives can be connected
here
WAN RJ45 WAN-port. This is the internet port. E.g. a DSL or cable modem is con-
nected here
DC PWR Connection for the plug-in mains adapter from the scope of delivery
3.5G ANT Connection for the UMTS-aerial
c) Operating Modes
The device supports the operating modes "Gateway", "Bridge" and "Wireless ISP".
Depending on the operating mode selected, there are different options for how access to internet
can be performed or how the connection from the computer to the router is established.
• Operating mode "Gateway"
In this operating mode, the product works as a regular WLAN router. The internet connection
is created via the installed UMTS modem or an external DSL or cable modem (with LAN con-
nection). It is connected to the WAN port of the router via a network cable. After confi guration,
PCs can connect to the router via WLAN and two LAN ports. The two LAN connections can be
extended with a network switch. The DHCP-server is permanently active.
40