Herunterladen Inhalt Inhalt Diese Seite drucken

AEG Electrolux FP 4200 Gebrauchsanweisung Seite 20

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

822_949_452 FP4200-4400_AEG.book Seite 17 Donnerstag, 12. Februar 2009 11:19 23
0 After mixing, turn container clockwise
and remove. Then turn the cover and
remove.
Multifunction section
Tools and their application
possibilities
The following tools can be used in the
multifunction section:
• Whisking disk (fig. 1/R)
• Metal blade (fig. 1/Q)
• Plastic blade (fig. 1/P)
• Insert holder (fig. 1/O) with cutting
insert (fig. 10)
The inserts are marked by a number
(1 to 6) on the handle. The desired
insert is placed in the insert holder.
1
Fine cutter
PG1 Potato grater
3
French fries cutter (only FP4400)
4
Cheese grater
5
Fine rasp
6
Coarse rasp
Preparing multifunction section
Fit safety cover (fig. 4)
The multifunction section can only be
put into operation when the mix con-
tainer is removed and the safety cover
for the mixer drive (figs. 1/T and 4) is
fitted.
0 Remove mix container as described
under "Mixer".
– The red warning lamp (fig 4/a)
flashes.
0 Place safety cover on mixer drive (mark
on mark
clockwise to the stop. The safety cover
is heard to engage (mark
mark
).
– The red warning lamp (fig. 4/a)
extinguishes.
) and turn counter-
on
Fitting all-purpose bowl (fig. 5)
– The red warning lamp (fig 4/a)
flashes.
0 Place all-purpose bowl (fig. 1/G) on
appliance (mark
on mark
turn counter-clockwise to the stop.
The all-purpose bowl can be heard to
engage (mark
on mark
– The red warning lamp (fig. 4/a)
extinguishes.
Inserting spindle (fig. 7)
0 Place spindle (fig. 1/H) on spigot in
centre of all-purpose bowl.
Inserting tools
The following tools can be selected for
insertion:
• Whisking disk (fig. 1/R) or
• Metal blade (fig. 1/Q) or
• Plastic blade (fig. 1/P) or
• Insert holder (fig. 1/O) with cutting
insert (fig. 9)
3
The insert holder must be fitted with
the appropriate insert depending on
the purpose of application (see "Insert-
ing cutting insert in insert holder").
0 Place desired tool on spindle.
– Whisking disk, metal blade and plas-
tic blade (fig. 8) mesh with the teeth
underneath on the spindle.
– The insert holder (fig. 11) rests on
the hexagonal spindle.
Preferably hold the insert holder with
3
two fingers in the two handle holes.
Fitting the cover (fig. 6)
– The red warning lamp (fig 4/a) flashes.
0 Place cover (fig. 1/F) on the all-purpose
bowl (mark
on mark
counter-clockwise to the stop. The
cover can be heard to engage. The nose
of the cover is then directly above the
handle (mark
on mark
– The red warning lamp (fig. 4/a)
extinguishes.
0 Insert stopper (fig. 1/E) in filling inlet.
g
) and
).
) and turn
).
17

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Fp 4400Fp 4 series

Inhaltsverzeichnis