Service And Customer Care - Kenwood AT334 Bedienungsanleitungen

to use your liquidiser
1 Ensure the sealing ring
in place on top of the blade unit
2 Fit the blade unit inside the base.
3 Screw the jug onto the base.
4 Put your ingredients into the jug.
5
AT334/ AT337/ AT338 - Fit the lid to
the jug and twist, making sure that
the jug spout is fully covered by the
lid.
AT339 - push the lid down.
6 Place the filler cap into the lid and
push down to secure.
7 Remove the high speed outlet
cover .
8 Place the liquidiser over the outlet,
turn clockwise and at the same time
push down until the unit engages
Then turn further clockwise until the
attachment locks into position.
9 Switch to maximum speed.
10 Once the desired consistency has
been achieved, switch off and
remove the liquidiser supporting it
with both hands.
hints
To prevent leaks:
G
wet the sealing ring before fitting
G G
it; and
Make sure the jug is locked firmly
G G
into the base.
When making mayonnaise, put all
G
the ingredients, except the oil, into
the liquidiser. Then, with the machine
running, remove the filler cap and
add the oil slowly and evenly.
Thick mixtures, eg pâté, dips: use
G
low to medium speed, scraping
down when necessary. If it's difficult
to process, add more liquid.
Alternatively use the pulse setting to
get the ingredients moving over the
blades.
cleaning
is snugly
G
.
G
1 Remove and wash the sealing ring.
2 Brush the blades clean under the
3 Leave to dry.
.
service and customer
care
G
G
G
G
G
G
3
Always dismantle before cleaning.
Empty the jug before unscrewing
the base.
blade unit
tap. Keep the underneath of the unit
dry.
other parts
Wash by hand in hot, soapy water.
Alternatively the jug, filler cap, lid and
base can be washed in your
dishwasher.
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
using your appliance or
servicing or repairs
Contact the shop where you bought
your appliance.
Designed and engineered by
Kenwood in the UK.
Made in China.