Switching On And Off; Turning The Appliance Handle; Maintenance And Cleaning - Parkside PWS 230 C3 Originalbetriebsanleitung

♦ Check whether all the fastening elements are
correctly fitted.
♦ Make sure that the arrow showing the direction
of rotation (if any) on the cutting or rough grind-
ing discs (including diamond cutting discs) and
the direction of rotation of the appliance (arrow
showing the direction of rotation on the head)
match.
Switching on and off
Check the inserted tool before use. It must be
properly installed, may not be damaged or damp,
should have no cracks and turn freely. Carry out
a 60 second test run. Do not use non-circular or
vibrating tools. Be aware of unusual noises and
sparks. Check whether all the fastening elements
are correctly installed.
NOTE
► Always switch on the angle grinder before
making contact with the material, then apply
it to the workpiece.
Switching on:
♦ Press the safety lock-out
♦ Then press the ON/OFF switch
Switching off:
♦ Let go of the ON/OFF switch

Turning the appliance handle

■ The handle can be turned by 90° to the
right or left (see fig. A).
■ This allows the ON/OFF switch
to the most suitable position depending on the
working conditions.
♦ Press the release button
ance handle to the right or left.
♦ Allow the appliance handle
place.
■ 42 │ GB
(see fig. E).
.
.
to be moved
and turn the appli-
to click into

Maintenance and cleaning

WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before starting any
work on the appliance.
■ Do not use any sharp objects to clean the
appliance. Never permit liquids to enter
inside the appliance. Otherwise the appliance
could be damaged.
■ The carbon brushes should only be replaced
by the service centre or an authorised specialist
workshop.
Apart from this, the appliance is maintenance-
free.
■ Clean the appliance regularly, preferably im-
mediately after completion of the work.
■ Clean the housing with a dry cloth – do NOT
use petrol, solvents or cleaners which can attack
the plastic.
■ A vacuum cleaner is required for thorough
cleaning of the appliance.
■ Ventilation openings must never be obstructed.
■ Remove any sanding dust stuck to the appliance
with a brush.
NOTE
► Replacement parts not listed (such as carbon
brushes, switch) can be ordered via our
service hotline.
PWS 230 C3