Electrical Connection; Declaration Of Conformity; Troubleshooting Guide - Whirlpool WSLK 65 AS X Installationsanleitung

Electrical connection

The mains voltage must match that given on the rating plate
located inside the hood. If provided with a plug, connect
the hood to a socket complying with the current regulations
and located in an accessible area. If it does not have a plug
(direct connection to the power supply) or if the plug is not
in an accessible place, fit a suitable double-pole switch that
ensures complete disconnection from the power supply
in category III overvoltage conditions, complying with the
installation rules.
WARNING: Power cable replacement must be carried
out by an authorised Service Centre or a qualified person.
WARNING: Before reconnecting the hood circuit to the
power supply and checking correct operation, always make
sure the power cable is correctly fitted and that it was NOT
crushed in its housing during installation. Make sure to have
this operation carried out by a specialised technician.
Cleaning the hood
WARNING! Failure to remove oil/grease (at least once a
month) could result in fire.
Use a soft cloth with a neutral detergent. Never use abrasive
substances or alcohol.
Before using the hood
Please read these instructions carefully and keep them for
future reference, in order to ensure best use of your hood.
The packing materials (plastic bags, polystyrene, etc.) are a
potential source of danger and must be kept out of the reach
of children.
Make sure the hood has not been damaged during
transport.

Declaration of conformity

This product has been designed, manufactured and put on
the market in conformity with:
- safety objectives of the "Low Voltage" Directive 2014/35/EU
- protection requirements of "EMC" Directive 2014/30/EU
- ecodesign requirements under Commission Delegated
Regulation (EU) No. 65/2014 and Commission Regulation
(EU) No. 66/2014 in accordance with European Standard
EN 61591;

Troubleshooting guide

If the hood does not work:
• Is the plug properly inserted in the power socket?
• Is there a power failure?
If the hood is not extracting enough:
• Is the right speed selected?
• Do the filters need cleaning or replacing?
• Are the air outlets blocked?
If the lamp does not work:
• Does the lamp need replacing?
• Is the lamp correctly fitted?
400010910557
NL FR DE
EL
AFTER-SALES SERVICE
Before calling the After-Sales Service
1. Check to see if you can fix the problem yourself (see
"Troubleshooting Guide").
2. Switch the appliance off and then on again to check if
the problem has been eliminated.
3. If the problem persists, contact the After-Sales Service.
Specify:
• the type of fault,
• the product model given on the dataplate inside the
hood, visible on removing the grease filters,
• your full address,
• your telephone number and area code,
• the Service code (the number under the word SERVICE
on the dataplate inside the hood, behind the grease
filter).
If any repairs are necessary, contact an authorised Service
Centre (to ensure the use of original spare parts and correct
repair).
Failure to comply with these instructions can compromise
the safety and quality of the product.
PT EN
IT ES