Printingfrom An Ms-Dos Application; Print Settingfrom The Ms-Dos Prompt - Sharp AL-840 Bedienungsanleitung

SETTING PRINT CONDITIONS FROM PRINTER DRIVER
DOS Emulation
A PCL4 DOS Emulation setup program can be started
by
clicking the Setup button. This is an
independent program that configures the PCL4 DOS emulation.
DOS Emulation Setup
DOS Copies
Specifies the number of sets to be printed. Any number from 1 to
50 can be selected. (default setting: 1)
DOS Orientation
Sets the page orientation. Portrait or Landscape can be selected.
(default setting: Portrait)
DOS Paper Source Specifies a paper feed station in the printer.(default setting: Paper
Tray)
DOS Paper Size Specifies the size of paper to be printed. (default setting: Letter
or A4 depending on the countries or regions)
DOSA4Width
Specifies the number of columns in a line in the width dlrectton of
A4 size. (default setting: 77 Columns)
DOS Lines Per Page Specifies the number of lines per page. (default setting: 60 lines
or 64 lines depending on the countries or regions)
DOS Fonts Specifies the font to be used for printing. (default setting: Courier
Requiar}
DOS Font Size
Specifies the font size. (default setting: 10 CPI)
DOS Symbol S§t
Specifies the symbol set to be used for printing. (default setting:
Roman-B)
About
There are no settings on the About tab page. This page displays the installed printer driver
version and copyright statements.
PRINTING FROM AN MS-DOS APPLICATION
Youcan execute printing from an MS-DOS application which has been executed from the MS~
DOS prompt in Windows.
~
Note
This printer can only print from applications run from the MS-DOS prompt in
Windows. It cannot print when running in native MS-DOS mode.
Print setting from the MS·DOS prompt
Windows 95!W[ndows 98 has the item, "Spool MS-DOS print jobs" in the port settings.lfthis
setting is not selected, the printer
will
not operate properly. Use the following- procedure to
check the setting.
-
1 5