Printing A Page; Exec:uting Prlntlnp - Sharp AL-840 Bedienungsanleitung

PRINTING
PRINTING A PAGE
The printing method is described below. Read the description with the operation manual for
the application to be used.
CD
Caution
• Before you can use your printer, you must install the printer driver which has I.
been supplied with the printer. Once this software has been installed, you
!I
can control the printing of your documents from the printer driver which
appears on your computer screen. See INSTALLINGTHE PRINTER DRIVER
SOFTWARE on page 4.
• When using multiple pnntars, you must change the printer setting from the
control panel to change the printer to be used. This printer cannot be used
with other GOl printers and printers that use the Windows Printing System.
For details, see USING OTHER INSTALLED DRIVERS on page 20.
Executing printing
CD
Caution
1
~
Note
2
3
4
~
Note
Ensure that paper of the desired size is loaded in the paper tray. (See the section on
LOADING COpy PAPER in the copier operation manuai.)
To print onto special paper, feed it one sheet at a time.
Turn on the printer. The ready
(G))
indicator will light up.
Select the settings for printing such as the number of sets and paper type from the
application. See SETTING PRINT CONDITIONS FROM PRINTER DRIVER on page
12
Before printing, ensure that the
Al.-BOO
series has been selected as the printer.
I
Print the file from your software application.
• If copying is being performed when printing is initiated, copying will continue.
After copying is complete, printing
will
be executed when the clear
(@)
key
is pressed twice or approximately 60 seconds (auto clear time)* elapse. __
* The auto clear time varies with a user program setting. See the copier
operation manual.
• Preheat mode and auto power shut-off mode will be canceled when printing
is started. -
1 1