Safety Advice For Hammer-Action Drills; Caution Utility Services; Original Accessories / Attachments - Parkside PSBM 500 A2 Bedienungs- Und Sicherheitshinweise Und Originalbetriebsanleitung

parts only. This will ensure that your device
remains safe to use.
Safety advice for hammer-
Q
action drills
U se the auxiliary handle supplied with
the device. Loss of control of the tool can
lead to injury.
A lways wear ear protection when us-
ing percussion drills. Exposure to noise can
cause hearing loss.
S ecure the workpiece. Use clamps or a
vice to grip the workpiece firmly.
I f a dangerous situation arises, pull
the mains plug immediately out of the
mains socket.
A lways work with the mains lead
leading away from the rear of the
device.
D o not allow the ventilation slots to
become covered while the device is
operating. Do not insert any objects into the
ventilation slots.
D ANGER OF FIRE FROM FLYING SPARKS!
Drilling or abrading metal creates flying sparks.
Always make sure that nobody is placed in any
danger and that there are no inflammable ma-
terials near the working area.
HAZARDOUS DUSTS!
Working with harmful / poisonous dusts presents
a danger to health for the tool operator and
any persons in the vicinity.
Wear safety glasses and a dust pro-
tection mask!
A void drilling paints containing lead
or other substances hazardous to
health.
D o not drill or abrade materials con-
taining asbestos. Asbestos is a known
carcinogen.
D o not drill moist materials or damp
surfaces.
W hen working with electrical tools,
hold them firmly in both hands and
make sure that your footing is secure.
General safety advice for electrical power tools
Using both your hands to hold electrical tools
ensures safer operation of them.
I f the inserted tool jams, switch off the
electrical power tool immediately. Be
prepared for high reaction torques as they may
cause kickback.
A lways keep the device clean, dry and
free of oil or grease.
O nly handle the electrical tool by means
of the insulated handling surfaces when
you are carrying out jobs where the
insertion tool may come into contact
with hidden power supply lines or its
own power cable. Contact with a live elec-
trical wire also makes metal parts of the electrical
tool live and leads to electric shock.
K eep your workplace clean and tidy.
Mixing materials is particularly dangerous. Dust
from light metals can burn or explode.
W ait until the electrical tool has come
to a standstill before putting it down.
The insertion tool could get caught up in some-
thing and this may lead to control of the electrical
tool being lost.

Caution utility services!

Q
DANGER! Ensure that you do not strike
electrical cables, gas or water pipes when
you are working with the electrical power
tool. Check a wall using a suitable detector before
you drill or cut slots.
Original accessories /
Q
attachments
Use only the accessories and attachments
detailed in the operating instructions.
The use of inserted tools or accessories other than
those recommended in the operating instructions
could lead to you suffering an injury.
GB 27