Personal Safety - Parkside PLS 48 C1 Originalbetriebsanleitung

e) When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
g) Always hold the power cord away from the working area of the appliance
and run it to the rear away from the appliance.
h) Always pull out the plug if you leave the appliance unattended or carry out
work on the appliance.

3. Personal safety

This appliance may be used by children aged
■
8 years and above and by persons with limited
physical, sensory or mental capabilities or lack of
experience and knowledge, provided that they
are under supervision or have been told how to
use the appliance safely and are aware of the
potential risks. Children must not use the appli-
ance as a plaything. Cleaning and user mainte-
nance tasks may not be carried out by children
unless they are supervised.
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication. A moment of inat-
tention while operating power tools may result in serious personal injury.
■ RISK OF BURNS! Do not touch the heated soldering tip or the
molten solder. There is a risk of being burnt. Always allow the ap-
pliance to cool down completely before changing components,
cleaning or checking it.
PLS 48 C1
GB
IE
5