Cleaning And Maintenance - Klarstein 10006681 Bedienungsanleitung

Cord Storage (optional)
1. After use, unplug the unit from main socket, pour out the remaining water from water tank after the unit has
been completely cooled down.
2. Place iron on base unit, fold supply hose and wind it clockwise around the cord slots of the base unit. Tie
power cord and folded supply hose together,then wind power cord clockwise around the cord slots of the
base unit, and lock the plug with supply hose. (Fig.11 - Fig.14)
Replacement of filter
Slide water tank out from base unit, take the filter out from water tank, and then replace with a new one. Af-
ter new filter has been installed well into water tank, fill water into water tank to Max fill level, and then slide
water tank back into base unit.(Immerse filter in water for several minutes in order togain better performance
in future use.)
Anti-calc-system
1. The filter is designed to reduce the build-up of limescale which occurs during steam ironing, this will prolong
the working life of your iron. However, please note that the filter will not completely stop the natural process
of limescales build-up.
2. The filter should be replaced with a new one after 2-3 months, in case of using one time each day. Working
life of the filter depends on water you used. Before replace, the filter can still be used continuously. However,
limescales may be most probably built up in steam chamber. This happens always depending on your local
water quality. I t is proposed that replace filter as soon as possible or mix your water with 50% proportion of
distilled water.
Emptying and storing
1. Disconnect the appliance from the power supply and allow the appliance to cool down for 60 minutes at least.
2. After use, slide out the water tank and pour out all the remaining water.
3. Wind the power cord around cord storage of the base unit.
4. The iron should be placed on the iron rest plate, lay handle down.
1. Unplug the appliance from the main supply and let the iron cool down.
2. Clean the iron with a damp cloth.
3. Wipe off scale and any other deposits on the soleplate with a damp cloth or non-abrasive(liquid) cleaner.
4. Never clean the appliance under the tap water.

Cleaning and Maintenance

12