Herunterladen Inhalt Inhalt Diese Seite drucken

Fitting The Sanding Sheet Onto The Sanding Plate; Changing Tools - Parkside IAN 282489 Originalbetriebsanleitung

Akku-multifunktionswerkzeug
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Application:
removal of material residues, such as tile adhe-
sive, when replacing damaged tiles
milling of grout on wall and floor tiles.
Scraper
Materials:
Mortar/concrete residues, tile/carpet glue, paint/
silicone residues
Application:
removal of material residues, such as carpet
glue residue on the floor.
Sanding plate
Materials:
Wood and metal (sanding sheets
wood*, metal*
*depending on the sanding sheet
Application:
sanding up to edges and hard to reach areas.
GB │ MT
20 
Fitting the sanding sheet onto the
sanding plate
Place the sanding sheet
sanding plate

Changing tools

NOTE
If necessary, remove an already fitted tool.
To do this, raise the tool release lever
Fit the tool (e.g. the plunge saw blade
the tool fitting.
NOTE
Fix the tool in its place by pushing the tool re-
lease lever
Check that the tool is fitted firmly. Incorrectly
or insecurely fitted tools can come loose during
use and cause you an injury.
supplied),
.
If you wish to use the dust collection, it must be
connected before fitting the tool (see section
"Connecting a dust extraction device").
WARNING! RISK OF INJURY!
Always remove the battery before working on
the power tool.
You can fit the tools in any snap position on
the tool fitting.
back down again.
centrally on the
.
) onto
PAMFW 12 B1

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Pamfw 12 b1

Inhaltsverzeichnis