How To Use - Ufesa Totalchef Rk6 Bedienungsanleitung

2. Push the blade through the opening at the bottom of the bowl.
3. Turn the jar over without removing the Blade and place the nut.
4. Rotate the nut clockwise to install it tightly on the blade.
5. Rotate the nut anti-clockwise slightly to remove the blade from the bowl.
6. While removing the blade from the bowl, you need hold the upper part of the blade with one hand,
and release the nut with the other hand.
Caution: the blade is very sharp. Handle it carefully. Only hold the upper part of the blade! The air-
proof ring for the blade must be fitted on the blade. If there is no airproof ring, the food will leak out
and it will damage the appliance.
HOW TO INSTALL THE BOWL
The Maximum capacity of the bowl is 3.5 liters. Don't process the food more than 2 liters!
Caution!
Hot surface" logo marked on the bowl: To indicate that the marked item can be hot and should not
be touched without taking precaution!
Install the bowl according to figure 3:
1. Put the lid with the airproof ring on the bowl.
2. Rotate the lid clockwise to lock it.
3. Insert the bowl onto the bowl socket. Be sure to make place Z1 point to place Z2. Press the bowl lid
slightly to ensure the bowl is well inserted.
4. Insert the measuring cup.
Notice: if the bowl cover or bowl is not assembled well, it will jump up dialog box to show E3 or E2 error.

HOW TO USE

Plug in and press on/off button to start the appliance. It will enter into stand-by state.
This appliance is a new design multifunctional cooking robot with screen display (See figure 7):
1. Home menu with automatic recipes: select your desired step-by-step guided interactive recipes.
After making your choice, the screen will show you all the recipe information. You can check the in-
gredients list, cooking preparation and start the cooking.
2. Recipe search: you may search the recipes you need here.
3. Favorite recipe list: you may collect your favorite recipes here
4. Manual mode cooking: you can set temperature, time, speed and direction as you wish (left and
right).
5. Weight function: max. 5Kg 5g interval.
6. Robot settings: access to this section to change robot settings.
a. WiFi: connect the kitchen robot to your WiFi network. A WiFi connection is required to download or
update recipes. Once the recipes are downloaded to your robot, you no longer need to be connected
to WiFi to cook your favorite dishes.
b. Brightness: click to enter the brightness setting interface.
c. Operating instructions: read a quick product introduction guide of how to use it
d. Language: check and change the language interface.
e. Version: check your robot's software version.
30