Specifications - Yamaha MSP5 Bedienungsanleitung

Specifications

General specifications
Type .......................................... Bi-Amp 2-way Bass Reflex Powered Speaker
Crossover Frequency ................. 2.5 kHz
Frequency Range ...................... 50 Hz–40 kHz
Maximum Output Level ............ 101 dB (1 m on Axis)
Dimensiones (W × H × D) ........ 169 × 279 × 222 mm
Weight ...................................... 7.5 kg
Speaker unit
Speaker Unit ............................. LF: 12 cm cone (4 , magnetic shielded)
Enclosure .................................. Type: Bass Reflex
Amp.unit
Maximum Output Power .......... LF: 40 W at 400 Hz, THD= 0.02%, RL=4
Input Sensitivity/Impedance ...... Line 1: +4 dB/10 k (XLR Blanced)
Signal to Noise Ratio ................ 100 dB (A Weighted)
Controls .................................... TRIM switch
Power Indicator ........................ Green LED
Power Requirement .................. USA and Canada: AC120 V, 60 Hz
Power Consumption ................. 60 W
Accessories ............................... Non-skid pads × 2
Specifications and appearance are subject to change without notice.
Dimensions
* Non-skid pad positions.
HF: 2.5 cm titan dome (6 , magnetic shielded)
Volume: 6.3 l
HF: 27 W at 10 kHz, THD= 0.02%, RL=6
Line 2: –10 dB/10 k (phone Unblanced)
LOW: 4 positions (+1.5 dB, 0 dB, –1.5 dB, –3 dB at 60 Hz)
HIGH: 3 positions (+1.5 dB, 0 dB, –1.5 dB at 15 kHz)
Power switch: On/Off
VOL control
Europe:
Others:
110*
W: 169
AC230 V, 50 Hz
AC240 V, 50 Hz
20*
7 171.5
D: 222
43.5
Unit: mm
5