Advanced Bionics Auria Direct Connect Gebrauchsanweisung Seite 5

To Connect the Direct Connect Cable:
• Remove the Processor from the ear.
• Hold the Processor by the base of the
Direct Connect earhook.
• Gently push the Direct Connect Cable
into the port at the top of the earhook.
Note: See the Harmony or Auria User's
Manual for an alternate method
of connection
• To remove the Direct Connect Cable
connector, hold the connector body
and gently pull from the port at the top
of the earhook.
Direct Connect Protection
Care should always be taken when using or handling.
3