Herunterladen Inhalt Inhalt Diese Seite drucken
GRUnDlG
7/86
Inhaltsverzeichnis
Mechanischer
Teil
Allgemeines
zum mechanischen
Gehäuse
abnehmen
2.
Laufwerk
und Chassis
Druckplatte
ausbauen
3,
Riemenwechsel
4
Schwungscheibe
wechseln
5.
Motorwechsel
6.
WiCkelteIIer
wechseln
7.
Andruckrouenhalter
wechseln
8.
Bandlaufeinstellung
9.
AufwiCkelmoment
bei Start
Grundbremsung
bei Start
10,
11.
Gleichlauf
12,
Kopfwechsel
13,
AW-Kopfhöhe
Elektrischer
Teil
Allgemeines zum elektrischen
Teil
Fehlerhinweise
1.
Leistungsaufnahme
2.
Spannungsprüfung
3.
Urnspulzeit
Bandgeschwindigkeit
einstellen
4,
5.
AW-Kopfspait-SenkreChtstelIung
Schaltbild
L-ageplan
Druckplattenabbildungen
6
, 14 Elektrische
Messungen
und Anforderungen
Ersatzteilliste
ExplosionszeiChnung
Laufwerk CL 200-8
Teil
3 und
21...24
25.„27
28 und
32 und
SERVICE MANUAL
Contents
Seite
Mechanical
section
2
General
information
2
Opening
cabinet
2
2.
Removing
drive mechanism
chassis-P.C.B.
3
3.
Replacing
drive belt
3
4.
Replacing
flywheel
4
5,
Replacing
motor
4
6.
Replacing spoof carrier
Replacing pinch roller arm
7.
4
5
Adjusting
tape transpon
5
9.
Winding
moment
5
10.
Basic
brake
5
11.
Synchronization
5
12.
Replacing head
6
13,
R/P head height
Electrical
Section
6
General
information
Notes
on faults
7
8
1.
Power consumption
8
2.
VOItage check
8
3.
Tape Winding time
8
4.
Adjusting
tape speed
8
5.
RIP head alignment, vertical adjustment
9...20
Circuit diagram
Scheme
Illustration
of printed
6.
14 Measurement
29
requirement
33
List of spare part
34
Exploded view CL 200-8
O
o
on the mechanical
section
and
at start
at start
on the electrical
section
plats
and
Btx * 32700
CF 35
O
Page
2
2
2
3
3
3 and 4
4
4
5
5
5
5
6
6
7
8
8
8
8
8
9...20
21 ...24
25...27
30...31
32 and
33
34
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Grundig CF 35

  • Seite 1 GRUnDlG SERVICE MANUAL Btx * 32700 7/86 CF 35 Inhaltsverzeichnis Contents Mechanischer Teil Seite Mechanical section Page Allgemeines zum mechanischen Teil General information on the mechanical section Gehäuse abnehmen Opening cabinet Laufwerk und Chassis Druckplatte Removing drive mechanism ausbauen chassis-P.C.B.
  • Seite 2: Inhaltsverzeichnis

    Die zahlen jm Text und bei den Abbildungen Sind mit den Positionsnum- used in the CF 35 spare parts list. The prefix LW indicates that the part with mern in der Ersatzteilliste CF 35 übereinstimmend.
  • Seite 3 3. Riemenwechsel LWI 2, (Abi 4) 3. Replacing drive belt LW12, (fig. 4) Gehäuse Pkt. 1 abnehmen. Open cabinet as in 1 above, I-aufwerk Pkt. 2 ausbauen, Remove drive mechanism as in 2 above a) Schrauben e ca. 2 Gewindegänge herausdrehen.
  • Seite 4: Gehäuse Abnehmen (Abb. 1)

    c. Servomotor LW39 (Kopfschlitten) (Abb. 3 und Abb. 5) Servomotor LW39 (head carrier) (figs. 3 and 5) 2 Schrauben g herausdret-ven. Remove 2 screws Motoranschlüsse ablöten. Beirn Anlöten am neuen Motor auf die Unsolder motor connections. Check that polarity iscorrect when resol- Polung achten, dering new motor.
  • Seite 5 35079-008.00), Andruckrolle LW25 und Tonwelle before inserting test cassette (e.g. GRUNDIG tape transport test cas- (LW 10) mit Spititus reinigen. sette, Part No. 35079-008.00) Durch Urnspulen einen geräteeigenen Bandwickel erzeugen. — Wind tape to produce a recorder-specific winding pattern Gerätefunktion : Wiedergabe, Start.
  • Seite 6: Erase Head

    Biegen am Kopfbol- Adjust tape transport as in 8 above. zen k korrigieren. Der Bandlauf ist nach Pkt. 8 einzustellen. Elektrischer Teil: CF 35 Electrical Section: CF 35 Allgemeines zum elektrischen Teil General information on the electrical section.
  • Seite 7: Fig

    Daten des aerates anhand der vorgegebenen Meßwerte of the recorder must be checked against the specified test values. überprüft werden. The GRUNDIG test equipment program includes all the requisite test and Alle dazu erforderlichen Meßgeräte Sind im GRUNDIG-Meßgerätepro- measuring equipment.
  • Seite 8 Method 2'. connect MF output of test circuit 1 to a sound level variation Zweite MögIiChkeit: NF-Ausgangs-MeßschaItung 1 an einem Tonhöhen- meter (such as a GRUNDIG synchronism analyser FA 1000) , or a frequency schwankungsmesser (Z.B. GRUNDIG Gleichlaufanalysator FA 1000) Oder...
  • Seite 9 OBSERVE SOS COMPONENTS SUCHLAUFAUSWERTUNG GRUnDlG rssosus SEARCH EVALUATION FERR r-PERLE L INKS FERRITE BE" LEFT LE 'ERRI IE TAPE SEI-EEL GAUCHE CF 35 STEUER'AREA vast SINISTRO •m iF'ER E cø HISC€LAfttCt NEGI-ABLE Blatt 1, page 1 acsn »€SSPUNKTE HEASURiNG POINTS...
  • Seite 10 0.1 pF 220? GEBROCHENER CASS. 3SOK RASK PFAN *204 09647. 220* mVg-. Cloo RI 70 RI 79 SENZA 'toe GRUnDlG ssc«v RI 56 MUT ING CF 35 BEIca HEAD Blatt 2, page 2 *SSPUMtE OSU*iNG POIKTS o RWI o R802...
  • Seite 11 720-113 M 40 NETZ 12A2 BANDSORTENSCHALTER TAPE TYPE SWITCH AUFSPRECHVERSTÅRKER RECORDING AMPLIFIER 22A2 DISPLAY 'RCtJ' 7,950 s M358P 8-2S SOS- T 42 tt-%H02S R&18 GRUnDlG o,ggv 5952-1". SCHUTZSCHALTUNG GL-M023 CF 35 Blatt 3, page 3 o R25S O R2S8 POINTS...
  • Seite 12 CAPSTAN TOMLLE MOTOR START HICRO RECORO HICRO PAUSE ffBUTJUST* LEO-PLATTE GRUIIDIG HEAD SCREW SWITCH BOARD AZIMUTH BOARD CF 35 Blatt 4, page 4 (85060) LAGEPLAN 72008-315.26 SCHEME Service Manual CF 35 Sach-Nc 72008-31527 Service manual CF 35 Order-No. 72008-315.27 POINTS...
  • Seite 13 SUCHLAUF-PLATTE TRAFOPIATTE SEARCH BOARD TRANSFORMER BOARD Socxer SOCKET 3 SOCKET 2 SOCKETI 52-34ö.OSrof)4B SOOO* R803 IRI /GS: •c KANAL R802 09066-501.211 240V 0962'-å29.os CHAM*EL I AMR. c808 2G2( PEGELOO LOESCHKOPF • 30 dB KOPF •{C805 ERASE HEAD . 980B 220•.'- fit? AT non 8273...
  • Seite 14 Messung Measurement/ MeasuremenV Betriebsart Einspeisung Meßbedingung Anforderung Mode Infeed Test parameter Requirement Prüfart Mode Infeed Test parameter Requirement test test Fremdwiedergabe Testbandcassette Meßstecker NF-Koptstrom External-source Test cassette Test connector Bezugsbandabta- (3180 und 70PS) 1 —RK playback, (3180 and 70PS) 23A I — right channel stung cr02i IEC II 23A3—LK...
  • Seite 15 Ersatzteilliste • List of Spare-Parts • CF 35 Measurement/ Test parameter Requirement Infeed Mode Benennung Benennung pos. Fig. Beste'l•NrJPart Pos. Fig. Bestell-NrJPart MF head current Réf./N'. dordinazioni Description RéL/Nr. d'ordinazioni Description Adjust the right and left level Vin: test circuit 6 Record f —...
  • Seite 16: Ersatzteilliste

    Ersatzteilliste • List of Spare-Parts • CF 35 • CL 200-8 Laufwerk • Drive Mechanism Pos. Fig. Bestell-NrJPørt NO. RélJNr. Benennung Description 34115-020.00 Chassis kpl. Chassis col. Abtaster Sensing lever 34115-612.00 tdr uckfeder Pressurespring M 2x10 34115-051.00 Schaltrad Control gear 34115-05?.00...

Inhaltsverzeichnis