Blackmagic Design Design 3G-SDI Arduino Shield Installations- Und Betriebs-Anleitung Seite 105

Group ID Parameter
.5 Input levels
Phantom
.6
power
Output 3
.0 Overlays
Display 4
.0 Brightness
.1 Overlays
.2 Zebra level
.3 Peaking level
Colour bars
.4 display
time (seconds)
Tally 5
.0 Tally brightness
Tally front
.1
brightness
Tally rear
.2
brightness
Type Index
[0] ch0
fixed16
[1] ch1
boolean –
–
–
uint16 bit
field
–
fixed16
int16 bit
field
fixed16
fixed16
int8
fixed16
fixed16
fixed16
Min Max Interpretation
0.0=minimum,
0.0 1.0
1.0=maximum
0.0=minimum,
0.0 1.0
1.0=maximum
true = powered, false =
– –
not powered
– – 0x1 = display status
– – 0x2 = display guides
Some cameras
don't allow
– – separate control of
guides and
status overlays.
0.0=minimum,
0.0 1.0
1.0=maximum
0x4 = zebra
– –
0x8 = peaking
0.0=minimum,
0.0 1.0
1.0=maximum
0.0=minimum,
0.0 1.0
1.0=maximum
0=disable bars,
0 30 1-30=enable
bars with timeout (s)
Sets the tally front and
tally rear brightness to
0.0 1.0 the same level.
0.0=minimum,
1.0=maximum
Sets the tally front
0.0 1.0 brightness. 0.0=minimum,
1.0=maximum
Sets the tally rear
0.0 1.0 brightness. 0.0=minimum,
1.0=maximum
Tally rear brightness
cannot be turned off
Studio Camera Control Protocol 103