InFocus CableWizard SP-CW3 Produkthinweis Seite 2

Product Note
Connect the
the projector's connector panel.
F
IGURE
Connecting the CableWizard
Connecting a Computer
1 (Desktop models only) Locate the cable that connects your monitor to
your computer. Unplug it from the computer.
2 Plug the
your computer.
(Desktop models only) Do you want to display the image on your computer's
monitor as well as on the projection screen?
1 Plug your monitor's cable into the
The projector must be turned on to display the image on your monitor. If
you later turn off the projector, disconnect the monitor and mouse
cables.
Do you want to play your computer's audio on the projector?
1 Unplug the audio cable, if present, from your computer.
2 Plug either end of the
on your computer.
3 Plug the other end of the audio cable into the
CableWizard
Downloaded from www.Manualslib.com
end of the
2
3
to the projector and the computer
end of the
CableWizard
CableWizard
3
.
manuals search engine
3
cable to the
CableWizard
3
cable into the monitor connector on
connector on the
3
audio cable into the audio connector
connector on
3
.
CableWizard
connector on the