Herunterladen Inhalt Inhalt Diese Seite drucken

Blitz M70H Bedienungsanleitung Seite 5

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Technical Features:
7'' (17,7cm) high res TFT LCD Active Matrix Video Screen
16:9 Widescreen Aspect Ratio
Resolution: 1440 x 234 Pixel (336.960 Pixel)
Brightness: 500cd/m² NITS
Contrast Ratio 300:1
View Angel Range (H/V): 130°/55°
OSD Menu
Control Buttons in the front
Automatic change PAL/NTSC
Integrated screen saver
Connections:
2x Video Inputs (1x 3,5mm jack in the front/ 1x RCA in the back)
2x Audio Inputs (1x 3,5mm jack in the front/ 1x RCA in the back)
1x earphone jack in the front
Included Accessories:
Mounting Shroud for Headrests or Sunvisors
Stand with ball joint for adjustable mounting
IR-Remote Control
AV-Connection Cable and Power Cable
Dimensions (BxHxT): 19,0cm x 13,2cm x 2,5cm
Weight: 450g
Cautions
Do not expose the monitor to high humidity, dust steam, oily smoke, direct sunlight
etc. For your safety, turn power OFF when not in use and unplug the adaptor. Never
attempt your own maintenance, consult your dealer or the company you bought it
from. Avoid dropping the unit and strong impacts.
For your safety, the driver should not operate the buttons or watch a movie while
driving.
Wiring
Please connect the red connection cable (+12 V, with open end, without plug) of the
provided cables with 12 Volt + (plus). And the black cable (Ground, with open end,
without plug) with Ground. Then please connect the yellow RCA connection cable (V1)
with the output of your video source and the red and white RCA connection cable with
the Audio output of the same video source. And connect the black cable with plug with
the connection socket of the screen.
Connection of a rear camera to your BLITZ screen:
1. Please connect the media source you wish to use (e.g. DVD-Player, Moniceiver etc.)
to the input V1 (Audio and Video).
2. Then please connect the rear camera with the input V2.
3. Then please connect the green cable with the open end (Reverse Function), which
switches the media source V1 to the rear camera V2 (if you have the reverse gear in)
to 12V + (plus) of your back light of the reserve gear.
2

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis