Parkside PDSP 1000 A1 Originalbetriebsanleitung Seite 8

Safety advice
C heck the device for damage before bringing it into
use. Do not use the device if you discover any defects.
keep children and other people away while you are
operating the sandblasting gun. Distractions can cause
you to lose control of the device.
RISk OF INJURY! IMPROPER USE! Never point the device
at people or animals.
For your own safety, wear suitable personal protec-
tive equipment.
Wear an approved dust mask / protective hood!
Wear protective glasses!
RISk OF ExPlOSION! Do not use the sandblasting gun
environments containing gases, open flames, fires or gas-operated
water heaters.
N O SMOkINg!
W ork in adequately ventilated spaces only.
N ever use oxygen or other combustible gas as the
energy source.
N ever exceed the maximum working air pressure of 8 bar.
give rise to recoil forces that under certain conditions can result in
danger from continuous loading.
D ANgER OF INJURY! Disconnect the device from the compressed
air source before carrying out any repairs or maintenance of the
device or moving it to another location.
D ANgER OF INJURY! Disconnect the device from the com-
pressed air source before filling it with blast medium.
N OTE! Please observe the safety advice provided by the manu-
facturer of the blast medium.
U se only materials for the blast medium that are suit-
able for the sandblasting gun. Do not use quartz sand.
There is the danger of toxic silicon dust forming.
8 GB/IE
RECOIl FORCES! High working pressures can
in
1