Brunner AT899 Anleitung Seite 3

GB
12V SUPER HIGH AIR FLOW AIR COMPRESSOR
Welcome.
This product has been carefully engineered and manufactured to give you
dependable operation. Please read this manual thoroughly before operating your
new product, as it contains the information you need to become familiar with its
features and obtain the performance that will bring you continued enjoyment for
many years. Please keep this manual on file for future reference.
SPECIFICATIONS:
Voltage:
Flow Rate:
Max. Pressure:
Accessories:
Amperage Draw
Air Hose
12V Power Cord
PRECAUTIONS ON USE:
1 This unit has an automatic reset thermal overload protector which will shut off the air
pump should the unit become overheated. The protector will automatically
reset the unit when the motor cools down.
2 Provide sufficient cooling time before storing away.
3 No oiling required.
4 The air pump operates only on 12V DC power. Simply connect unit to car's 12V
power outlet or to any other 12V power source.
5 Please check your car owner's manual to ensure your vehicles's 12V power outlet has
sufficient amperage output to run this unit, as damage to your 12V power outlet may
occur.
TO INFLATE TYRES:
1 To obtain maximum power when using the air pump from car's power supply, keep
engine running during operation.
2 Connect air pump to car's 12V outlet or 12V power source.
3 Connect hose to tyre's air valve.
4 Turn air pump ON.
5 When desired pressure is obtained, switch air pump OFF and remove hose from
tyre's valve.
TO INFLATE OTHER INFLATABLE GOODS SUCH AS BICYCLE TYRES,
RUBBER BOATS, TOYS, AIR MATS AND SPORT BALLS
1 Connect air pump to car's 12V outlet or 12V power source.
2 Select desired nozzle adaptor to fit inflatable object.
3 Turn air pump ON.
4 When desired pressure is obtained, switch air pump OFF
and remove hose from inflatable object.
12V
40L/Min
10 Bars
3 standard
nozzle adaptors
12 Amps under load
60 cm
3M
Air Hose
3
0436018N
Carry Handle
Tyre Pressure Gauge
On/Off Switch
12V Power Cord
e13
021578