Maintenance And Safety Care - Isopad IConTD7000 Series Bedienunganleitung

Alarm-Codes on Sensor-... Interruption
alternate flashing, 1-2 sec long
no sensor
Pt100
Fe-CuNi
NiCr-Ni
Caution:
On identifiable flaws the heating is switched off/de-activated until the
flaw has been removed/resolved.
On Fe-CuNi and NiCr-Ni sensors, a short cannot be recognized every
time, but is shown as a wrong temperature value, which is physically
caused due to their build-up.
n.a.: not applicable

Maintenance and Safety Care

Maintenance and care is performed
according to the standards listed
under "General Safety Instructions"
and "Additional Safety Instructions",
the regulations of the employer's
liability insurance associations ap-
plicable to the respective way of
use, as well as other relevant rules
applying to the application.
At least once per year the function
of the temperature-controlling de-
vice has to be checked and the
/ Break
8 8 8 8 + ' 4 2 5
8 8 8 8 + ' 4 2 5
8 8 8 8 + ' 1 3 2 6 wrong temp. displayed
8 8 8 8 + ' 7 2 6 wrong temp. displayed
surface and connection line should
be inspected for visible damage.
Repair:
Repairs may only be made by
authorized staff by origin manufac-
turer (mainly in factory) or by enter-
prises expressly authorized by this
manufacturer.
Only original spare parts have to be
implemented and equipment autho-
rized by the manufacturer!
short current
n.a.
8 8 8 8 + ' 4 2 5
no
bridge
n.a.
8 8 8 8 + ' 0
n.a.
n.a.
13