Herunterladen Inhalt Inhalt Diese Seite drucken

Hazards Caused By Entanglement; Hazards During Operation; Risks Due To Repetitive Movements; Hazards Caused By Accessories - Parkside PDEXS 150 B2 Originalbetriebsanleitung

Druckluft-exzenterschleifer
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Hazards caused by entanglement

Suffocation, scalping or and/or cut wounds can
occur if loose clothing, jewellery, necklaces, hair
or gloves are not kept away from the machine
and its accessories.

Hazards during operation

When using the machine, the operator's hands
can be subject to hazards such as cuts, grazing
GB
and heat. Wear suitable gloves to protect your
hands.
The operator and maintenance personnel must
be physically capable of handling the size,
mass and power of the machine.
Hold the machine correctly: be ready to coun-
teract any normal or sudden movements - have
both hands ready.
Ensure that your body is balanced and that you
have a secure standing position.
Release the start/stop control in case of a dis-
ruption to the electricity supply.
Use only lubricants recommended by the manu-
facturer.
Avoid direct contact with the movable grinding
disc to avoid squashing or cutting your hands or
other parts of the body. Always wear suitable
gloves to protect your hands.
Check the sanding disc before every use. Do
not use if this is cracked, broken or has been
dropped.
Avoid direct contact with the movable sanding
disc to avoid squashing or cutting your hands or
other parts of the body. Always wear suitable
gloves to protect your hands.
Never use the machine without an abrasive
attachment.
There is a risk of electrostatic discharge if the
machine is used on plastic and other non-
conductive materials.
Dust and vapours created by the sanding and
sanding can cause a potentially explosive at-
mosphere. Always use a dust extraction or sup-
pression system suitable for the material being
worked.
30

Risks due to repetitive movements

When using a sanding machine for sanding
sheets or a polisher to perform work-related
activities, operators may experience uncomfort-
able sensations in their hands and arms, as well
as in the neck and shoulders or other parts of
the body.
When using a sanding machine for sanding
sheets or a polisher, the operator should adopt
a comfortable posture whilst ensuring a secure
hold and avoiding awkward postures or posi-
tions in which it is difficult to maintain balance.
The operator should change positions during
the course of long-lasting tasks. This can be
helpful in the prevention of discomfort and
fatigue.
If the operator notices symptoms such as persis-
tent or recurring illness, discomfort, throbbing,
pain, tingling, burning or stiffness, these indica-
tions should not be ignored.
In this case, the operator should consult a suitably
qualified physician.

Hazards caused by accessories

Disconnect the sanding machine for sanding
sheets or the polisher from the power supply
before fitting or replacing the machine tools or
accessories.
Avoid direct contact with the machine tool during
and after use, since this can have heated up or
have become sharp.
Only machine tools which were designed by
the manufacturer for sanding machines with
sanding sheets and polishers may be used
for sanding machines for sanding sheets and
polishers.
Cutting discs and machines for cutting may not
be used.
Check whether the maximum operational speed
of the machine tool (buffs, sanding sheets, fibre
discs etc.) is higher than the rated speed of the
machine;
Self-adhesive sanding discs must be applied
concentrically on the mounting plate.
PDEXS 150 B2

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

275679

Inhaltsverzeichnis