Herunterladen Inhalt Inhalt Diese Seite drucken
Meinberg LANCPU Handbuch
Meinberg LANCPU Handbuch

Meinberg LANCPU Handbuch

Ntp zeitserver modul
HANDBUCH
LANCPU
NTP Zeitserver Modul
22.07.2010
Meinberg Funkuhren GmbH & Co. KG
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Meinberg LANCPU

  • Seite 1 HANDBUCH LANCPU NTP Zeitserver Modul 22.07.2010 Meinberg Funkuhren GmbH & Co. KG...
  • Seite 3: Inhaltsverzeichnis

    Inhaltsverzeichnis 1 Impressum 2 NTP Zeitserver Modul 3 Network Time Protocol (NTP) 4 Die grafischen Konfigurations-Schnittstellen 5 Das HTTP Interface...
  • Seite 4 6 Das Kommandozeilen Interface 7 SNMP Server...
  • Seite 5: Impressum

    1 Impressum Meinberg Funkuhren GmbH & Co. KG...
  • Seite 6: Ntp Zeitserver Modul

    2 NTP Zeitserver Modul...
  • Seite 7 2.1 Technische Daten LAN CPU...
  • Seite 8: Steckerbelegung Lancpu

    2.1.1 Steckerbelegung LANCPU 2.1.2 Belegung der Stiftleiste (VGA, Tastatur)
  • Seite 9: Network Time Protocol (Ntp)

    3 Network Time Protocol (NTP) 3.1 NTP Client Zielsysteme 3.2 NTP-Client Installation congure make...
  • Seite 10 make install z.B.: tail /var/log/messages ntpd -llogle z.B.: ntpq/ntpq remote refid when poll reach delay offset ji�er ======================================================================= LOCAL(0) LOCAL(0) 0.00 0.000 7885 lan�me .GPS. 0.00 60.1 15875 Folgende Informationen werden angezeigt:...
  • Seite 12: Die Grafischen Konfigurations-Schnittstellen

    4 Die grafischen Konfigurations-Schnittstellen...
  • Seite 13: Das Http Interface

    5 Das HTTP Interface 5.1 Konfiguration: Hauptmen ¨ u...
  • Seite 15 5.2 Konfiguration: Ethernet...
  • Seite 16: Syslog Server

    5.2.1 SYSLOG Server 5.3 Netzwerkdienste Beispiel: 192.168.10.2 5.3.1 DHCP IPv4...
  • Seite 17: Ipv6 Adressen Und Autoconf

    5.3.2 IPv6 Adressen und Autoconf Beispiel: äquivalent 5.3.3 High availability bonding...
  • Seite 18: Zus ¨ A Tzliche Netzwerkkonfiguration

    5.3.4 Zus ¨ a tzliche Netzwerkkonfiguration...
  • Seite 19: Alarm Ereignisse

    5.4 Konfiguration: Notification 5.4.1 Alarm Ereignisse...
  • Seite 20: Alarm Email

    Attention: mbgLtTrapNormalOperation clears everything! It is a master trap to show that the LANTIME is running in full state! Trapname Cleared By 5.4.2 Alarm EMAIL...
  • Seite 21: Benutzerdefinierte Benachrichtigung

    5.4.3 Windows Popup Message 5.4.4 Alarm SNMP-TRAP 5.4.5 VP100/NET Display 5.4.6 Benutzerdefinierte Benachrichtigung 5.4.7 NTP Client ¨ Uberwachung...
  • Seite 22 5.4.8 Alarm Texte...
  • Seite 23: Konfiguration: Sicherheit

    5.5 Konfiguration: Sicherheit...
  • Seite 24 5.5.1 Passwort 5.5.2 HTTP Zugangsberechtigung...
  • Seite 25 5.5.3 SSH Secure Shell Login ssh root @ 192.168.16.111 timeserver 5.5.4 SSL Zertifikat f ¨ u r HTTPS erstellen...
  • Seite 26: Ntp Schl ¨ U Ssel Und Zertifikate

    5.5.5 NTP Schl ¨ u ssel und Zertifikate...
  • Seite 27: Snmp Parameter

    5.5.6 SNMP Parameter...
  • Seite 28 5.6 Konfiguration: NTP...
  • Seite 29 /etc/ntp.conf /mnt/ash/ntpconf.add /etc/ntp.conf...
  • Seite 31 5.6.1 NTP Authentication...
  • Seite 32: Ntp Autokey

    keys /mnt/ash/ntp.keys trus- tedkey ntp.keys requestkey 15 ntpq controlkey 15 ntpdc ntp.keys 5.6.2 NTP Autokey...
  • Seite 33 a) Trusted Host b) Host c) Client...
  • Seite 34 Beispiel:...
  • Seite 35 5.7 Konfiguration: Lokal...
  • Seite 36: Administrative Funktionen

    5.7.1 Administrative Funktionen 5.7.2 Benutzerverwaltung...
  • Seite 37 5.7.3 Administrative Informationen...
  • Seite 39: Software Update

    5.7.4 Software Update 5.7.5 Automatische Konfigurationspr ¨ u fung...
  • Seite 40 5.7.6 Diagnose Informationen speichern 5.7.7 Sprache des WEB-Interface...
  • Seite 41 5.8 Konfiguration: Statistik 5.8.1 Statistik Informationen...
  • Seite 42 Mem free Disk free Uptime...
  • Seite 43 5.9 Konfiguration: Handbuch...
  • Seite 45: Das Kommandozeilen Interface

    6 Das Kommandozeilen Interface...
  • Seite 46 6.1 CLI Ethernet...
  • Seite 47 Beispiel: 192.168.10.2 Beispiel:...
  • Seite 48 6.2 CLI Notification...
  • Seite 49 VP100/NET Groÿanzeige NTP Client Überwachung...
  • Seite 50 6.3 CLI Security...
  • Seite 51 ssh root @ 192.168.16.111 6.4 CLI NTP Parameter...
  • Seite 52 /etc/ntp.conf /mnt/ash/ntpconf.add /etc/ntp.conf 6.4.1 NTP Authentication...
  • Seite 53 Manuelle NTP Konguration...
  • Seite 54 6.5 CLI Local...
  • Seite 55 Satellite Dilutions Of Precision Satellite Info...
  • Seite 57 7 SNMP Server Folgende SNMP Version ist installiert: snmpwalk v2c c public timeserver enterprises.5597...
  • Seite 58: Beispiele Snmp Konfiguration

    7.1 Konfiguration ¨ u ber SNMP 7.1.1 Beispiele SNMP Konfiguration root@testhost:/# snmpwalk -v 2c -c public timeserver.meinberg.de mbgLtCfg...
  • Seite 59: Senden Von Befehlen An Den Zeitserver Per Snmp

    -v 2c -r 0 -t 10 -c rwsecret timeserver.meinberg.de mbgLtCfgHostname.0 string helloworld root@testhost:/# root@testhost:/# snmpset -v 2c -r 0 -t 10 -c rwsecret timeserver.meinberg.de mbgLtCfgHostname.0 string helloworld mbgLtCfgDomainname.0 string internal.meinberg.de root@testhost:/# 7.1.2 Weitere Konfigurationsm ¨ o glichkeiten 7.1.3 Senden von Befehlen an den Zeitserver per SNMP...
  • Seite 60 GenerateSSHKey(4) GenerateHTTPSKey(5) ResetFactoryDefaults(6) GenerateNewNTPAutokeyCert(7) SendTestNotication(8) Ein Beispiel für die Nutzung dieses Features: root@testhost:/# snmpset -v2c -r 0 -t 10 -c rwsecret timeserver.meinberg.de mbgLtCmdExecute.0 int 1 root@testhost:/# root@testhost:/# snmpset -v2c -r 0 -t 10 -c rwsecret timeserver.meinberg.de mbgLtCmdExecute.0 int ReloadCong root@testhost:/#...
  • Seite 61 SNMP Objekt Bezeichnung Beschreibung SNMP Zweig Variable Datentyp Beschreibung...
  • Seite 62 SNMP Zweig Variable Datentyp Beschreibung...
  • Seite 63 SNMP Zweig Variable Datentyp Beschreibung...
  • Seite 64 SNMP Zweig Variable Datentyp Beschreibung email wmail snmp disp...
  • Seite 65: Snmp Traps

    SNMP Zweig Variable Datentyp Beschreibung 7.2 SNMP Traps...
  • Seite 66 7.2.1 SNMP TRAP Referenz mbgLtTrapNTPNotSync (mbgLtTraps.1): mbgLtTrapNTPStopped (mbgLtTraps.2): mbgLtTrapServerBoot (mbgLtTraps.3): mbgLtTrapReceiverNotSync (mbgLtTraps.5): mbgLtTrapAntennaFaulty (mbgLtTraps.6): mbgLtTrapAntennaReconnect (mbgLtTraps.7): mbgLtTrapCongChanged (mbgLtTraps 8): mbgLtTrapLeapSecondAnnounced (mbgLtTraps 9): mbgLtTrapTestNotication (mbgLtTraps 99):...

Inhaltsverzeichnis