Front Panel; Controls And Functions - Yamaha NX-50 Bedienungsanleitung

Front panel

R speaker (Right)
(On the right side when
facing the front of the
speakers.)
a
b
c
1
En

Controls and functions

L speaker (Left)
(On the left side when
facing the front of the
speakers.)
1 Headphones connector (3.5 mm stereo mini jack)
Use for a headphones connection.
When a headphones connection is made, no sound is output from the speakers.
Notes
To protect your hearing, make sure that the volume is low before headphones are
used.
• Do not use headphones with a loud volume for a long time. Otherwise, your
hearing may be damaged.
• Make sure that the volume of the audio devices is at minimum before
headphones are connected. A sudden loud sound may damage your hearing.
2 VOL (volume) control
Controls the volume of both speakers and headphones.
The volume becomes louder as the VOL control is rotated to the right,
and quieter as it is rotated to the left.
Loudness control
The Loudness control function of the speakers allows you to enjoy rich
bass tone sounds even at low volumes.
It automatically corrects the sound volume level from the speakers to
allow you to hear the best possible sounds.
When you use the speakers connected to an external device, such as your
TV, computer, portable player, etc., adjust the output sound level as
follows.
a After you connect the speakers to an external device, turn on
the power of the speakers and then rotate the VOL (volume)
control to the 2 o' c lock position (right illustration).
b Adjust the volume of the external device to its loudest output
level, without annoying blaring or distortion.
For details about external devices, see their instruction
manuals.
c Rotate the VOL control of the speakers to adjust the volume to the desired level.