Herunterladen Inhalt Inhalt Diese Seite drucken

Display Setting - Yamaha BD-A1010 Bedienungsanleitung

Blu-ray disc player
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 92
SETUP MENU
Network
Internet Connection
Set this item to Enable when you use BD-Live (p. 26), DLNA
(p. 21) and software upgrade from the network (p. 37).
*
Enable
, Disable
Information
You can display network information screen. On this
screen, you can view the information of Interface
(Ethernet), Address Type, IP Address, Subnet Mask,
Default Gateway, and DNS.
Connection Test
You can perform an internet connection test. If the test is
failed, please check "IP Setting" (p. 32) and perform the
test again.
IP Setting
You can configure the network settings.
Auto*
Select to automatically configure the network
settings of this Player with the DHCP server.
Manual
Select to configure the network settings (IP Address,
Subnet Mask, Default Gateway, and DNS) manually.
Hints
– Numeric keys Enters characters.
– 2/3
Moves the highlight.
– CLEAR
Deletes a character.
– ENTER
Saves the settings and exits from
the menu.
BD-Live Connection
You can set access restriction to BD-Live contents.
Allows all BD-Live discs to connect the network.
Permitted
Partial
Allows only discs with owner certification.
*
Permitted
Prohibited
Prohibits all BD-Live discs to connect the network.
DLNA
You can set the DLNA (p. 21) to Enable/Disable. When
you do not use the DLNA function, set to Disable.
Enable
*
, Disable
Proxy Setting
You can set Proxy Setting. Set to Disable for normal use.
Set to Enable to set the proxy setting.
Enable
Enables proxy host and proxy port setting.
*
Sets proxy server to disable. Select this item when
Disable
proxy server is not used.
Proxy Host
Sets proxy host.
Proxy Port
Sets proxy port.
32
En

■ Display Setting

The default settings are marked with "
TV
3D Output
You can select 3D or 2D video output from this Player.
Auto*
This Player automatically selects 3D or 2D videos.
Off
This Player always selects 2D videos.
Note
– Even if you set "3D Output" to "Auto" and play
back a Blu-ray 3D disc, this Player selects 2D
images depending on the connection and the setting
of TV, etc (p. 12).
TV Screen
You can set the screen aspect ratio of the connected TV,
and adjust the video output.
If you switch your TV (i.e. because you have bought a
new one) and the screen aspect ratio of the connected TV
changes, you will have to change the TV Screen setting.
16:9 Full
Select this when this Player is connected to a TV
with a 16:9 screen. When a 4:3 aspect ratio video is
played back, the video is displayed as shown below.
*
Select this when this Player is connected to a TV
16:9 Normal
with a 16:9 screen. When a 4:3 aspect ratio video is
played back, the video is displayed as shown below.
4:3 Pan Scan Select this when this Player is connected to a TV
with a 4:3 screen. When a 16:9 aspect ratio video is
played back, the video is displayed as shown below.
4:3 Letterbox Select this when this Player is connected to a TV
with a 4:3 screen. When a 16:9 aspect ratio video is
played back, the video is displayed as shown below.
On 16:9 (wide screen) TV
Original
image size
16:9 Full
4:3
Original
image size
4:3 Pan Scan
16:9
".
*
16:9 Normal
On 4:3 TV
4:3 Letterbox

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis