Herunterladen Inhalt Inhalt Diese Seite drucken
Verfügbare Sprachen

Verfügbare Sprachen

RAUSIKKO BOX LT
DE
Installationsanleitung
EN
Installation Instruction
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Rehau RAUSIKKO BOX LT

  • Seite 1 RAUSIKKO BOX LT Installationsanleitung Installation Instruction...
  • Seite 2 Inhalt / Contents Installationsanleitung Installation Instruction...
  • Seite 3 RAUSIKKO BOX LT Installationsanleitung...
  • Seite 4 Inhalt Allgemeine Informationen 01.01 Übersicht der Komponenten der RAUSIKKO Box LT 05 01.02 Übersicht weiterer Hauptkomponenten des RAUSIKKO Systems 01.03 Aufbau des Systems Einbaubedingungen Transport und Lagerung Baugrube und Bettung Zusammenbau der Boxen 05.01 Ausrichtung der Bauteile 05.02 Verbindungselemente 05.03 Palettierung 05.04...
  • Seite 5: Allgemeine Informationen

    Allgemeine Informationen 01.02 Übersicht weiterer Hauptkomponenten Die RAUSIKKO Box LT wird zum Aufbau von Anlagen zur Regenwasserbewirtschaftung verwendet. des RAUSIKKO Systems Weitere Informationen zu unseren Produkten finden Sie in unserer TI. Um eine optimale Konstruktion mit projektspezifischer Flexibilität zu gewährleisten, stehen folgende Grund- komponenten der RAUSIKKO Box LT zur Verfügung.
  • Seite 6 Lagen) und einer Höhe von 360 mm (Typ 8.3, für halbe Lagen) zu kombinieren. Für eine effektive Wartung des Systems empfehlen wir Kombination RAUSIKKO Box LT und C3 Typ X den Einsatz von Schächten RAUSIKKO C3 Typ X sowie von RAUSIKKO SC/SX-Boxen mit integriertem Reini-...
  • Seite 7: Einbaubedingungen

    Flächenbelastung als oben beschrieben führen könnten. Davon abweichende Einbaubedingungen – insbeson- dere größere Einbautiefen – bedürfen einer individu- ellen Beurteilung und sind mit der REHAU-Anwen- dungstechnik abzuklären. Die Genehmigung dieser alternativen Einbaubedin- gungen erfolgt durch das mit dem Einbau beauftragte...
  • Seite 8: Transport Und Lagerung

    Transport und Lagerung Alle Teile des RAUSIKKO Box LT-Systems werden Die RAUSIKKO-Boxen können im Freien gelagert gestapelt und umreift auf Paletten geliefert. werden. Sie müssen auf einem ebenen und festen Untergrund aufgestellt werden. Aus Sicherheits- gründen darf die Stapelhöhe (max. 2 Paletten) 3,00 m nicht überschreiten.
  • Seite 9: Baugrube Und Bettung

    Baugrube und Bettung Die geltenden Gesetze zur Unfallverhütung bei Erdar- beiten sowie die geltenden Normen für das Ausheben von Baugruben und Gräben sind zu beachten. Auf dem Untergrund wird ein ca. 10 cm dickes Fein- Die Länge/Breite des Grabens entspricht der Länge/ kiesauflager mit einer Körnung von 2/8 mm eingebaut.
  • Seite 10: Zusammenbau Der Boxen

    Zusammenbau der Boxen 05.01 Ausrichtung der Bauteile 05.02 Verbindungselemente Nur an einer der vier Bauteilecken des Grundelements Am Grundelement befinden sich Rasthaken, zum befindet sich eine Tragsäule. Ebenso befindet sich nur festen Verbinden des Grundelementes mit dem an einer Ecke des Bodengitters eine Aufnahme für diese Bodengitter, oder bei einem mehrlagigem Aufbau, Tragsäule.
  • Seite 11 Für den Aufbau mehrlagiger RAUSIKKO Box LT Systeme wird ein weiteres Grundelement von der Palette genommen und über dem Aufbau positioniert. Die Richtung der Pfeilmarkierungen ist auch hier stets zu berücksichtigen. Entnahme eines Grundelements aus einem palettierten Stapel 05.04 Montage/Zusammenbau...
  • Seite 12 Ausrichtung der offenen Rückseiten der RAUSIKKO Box LT Grundelemente zur RAUSIKKO Box S/SC Schematische Darstellung der Anordnung und Ausrichtung der RAUSIKKO Box LT Elemente im Gesamtsystem aus der Vogelper- spektive (Draufsicht) Ausrichtung der offenen Rückseiten der RAUSIKKO Box LT Grundelemente zur RAUSIKKO Box SX...
  • Seite 13 Nennweiten DN 110-DN 500 oder mit Frontan- schlussstutzen DN 200/250 ▪ an RAUSIKKO 8.6 S/SC direkt über Frontgitter Die RAUSIKKO Box LT kann bei mehrlagigen Anlagen auch auf die Grundelemente anderer RAUSIKKO Boxen DN 110-250, mit Frontanschlussstutzen 8.6 S/SC/SX/H/HC aufgebaut werden. Hierzu sind DN 200/250 oder Anschlussadapter DN 315-DN 500 ▪...
  • Seite 14 06.06 Geotextilien Sobald die Installation der Boxen abgeschlossen ist und alle Schachtverbindungen hergestellt sind, wird Für den Einbau einer Versickerungsanlage wird das das RAUMAT-Vlies von den Grabenrändern entfernt Box System vollständig mit dem RAUMAT Filtervlies und über die RAUSIKKO Boxen mit einer Überlappung oder einem vergleichbaren Vlies mit mind.
  • Seite 15: Verfüllen Der Baugrube

    Verfüllen der Baugrube Der seitliche Arbeitsraum ist mit nichtbindigem, stein- Im Falle einer Versickerungsmulde mit darunter freiem, verdichtungsfähigem Boden (Sand oder Kies, liegender Boxen-Rigole wird nach dem Zurückschlagen Bodengruppe G1 gemäß DWA-Arbeitsblatt A127) in des Filtervlieses auf die Rigole eine 0,1 m dicke Sand- Lagen von 0,3 m aufzufüllen.
  • Seite 16: Betriebliche Maßnahmen

    Betriebliche Maßnahmen Die Versickerungsanlage soll nach Möglichkeit erst Wenn dieser Mindestabstand nicht eingehalten nach Befestigung und Begrünung des Einzugsgebietes werden kann, sollten die Oberseite und die dem Baum in Betrieb genommen werden. zugewandte Seite der Rigole mit einer Wurzelschutz- folie abgedeckt werden. Die Stöße der Bahnen sollten Eine bauzeitliche Entwässerung ist sicherzustellen.
  • Seite 17 RAUSIKKO BOX LT Installation Instruction...
  • Seite 18 Contents General information 01.01 Overview of the components of RAUSIKKO Box LT 19 01.02 Overview of additional RAUSIKKO system main components 01.03 Construction of the System Installation conditions Transport and storage Excavation pit and bedding Assembly of the boxes 05.01 Orientation of components 05.02...
  • Seite 19: General Information

    General information 01.02 Overview of additional RAUSIKKO The RAUSIKKO Box LT is used to build systems for storm water management. system main components More information about our products can be found in our rainwater management catalogue. The following basic components of RAUSIKKO Box LT are available to ensure an optimal construction with project-specific flexibility.
  • Seite 20 360 mm (type 8.3, for half layers). We recommend the inclusion of RAUSIKKO C3 Type X chambers and RAUSIKKO SC/SX-Box with an inte- grated cleaning and inspection channel for an effective Combination of RAUSIKKO Box LT and C3 Type X maintenance of the system.
  • Seite 21: Installation Conditions

    Installation conditions which deviate from this – in particular deeper installation depths – require an individual assessment and are to be clarified with the REHAU technical applications department. The approval of these alternative installation conditions is ultimately given by the company commissioned with the installation and/or the building supervisor or specifier.
  • Seite 22: Transport And Storage

    Transport and storage All parts of RAUSIKKO Box LT system are supplied The RAUSIKKO Boxes can be stored outside. They stacked and strapped on palettes. have to be placed on a level and firm surface. Due to safety reasons, the stack height (max. 2 palettes) must not exceed 3.00 m.
  • Seite 23 Excavation pit and bedding The applicable legislation on accident prevention for excavation as well as the applicable standards for digging excavation pits and trenches are to be observed. An approx. 10 cm thick fine gravel bed with a 2/8 mm grain is to be laid on the base.
  • Seite 24 Assembly of the boxes 05.01 Orientation of components 05.02 Joining elements There is only a support pillar on one of the four corners There are snap-in hooks on the base element for firmly of the basic element. Likewise, there is only one slot connecting the base element to the floor grid or, in the for this support pillar on one corner of the floor grid.
  • Seite 25 To set up multi-layer RAUSIKKO Box LT systems, another basic element is taken from the pallet and positioned over the structure. Here, too, the direction of the arrow markings must always be considered. Removal of a basic element from a palletized stack 05.04...
  • Seite 26 The open backs must always be positioned on the inside in the overall structure. Schematic representation of the arrangement and alignment of the RAUSIKKO Box LT elements in the overall system from the side view open boundaries (arranged inside) When setting up the system, the object specific construction plan must be considered.
  • Seite 27 In the combined setup, the floor grid is first placed precisely on the desired RAUSIKKO Box 8.6 S/SC/ SX/H/HC. The RAUSIKKO Box LT is then set up in the same way as in section 05.04. Direct pipe connection using Direct pipe connection to...
  • Seite 28 06.06 Geotextiles The geotextile is cut cross-shaped at pipe connections. For the installation of an infiltration system the box Once the installation of the boxes is finished and all system is covered completely with the RAUMAT shaft connections are complete the RAUMAT non-woven or a comparable fleece with min.
  • Seite 29 Filling the Excavation Pit The working area next to the tank is to be filled with In the case an infiltration trough with an underlying non-cohesive, stone-free soil which can be compacted box infiltration tank once the geotextile filter has been (sand or gravel, soil group G1 according to DWA work pulled back.
  • Seite 30 Operational Measures If possible, the infiltration system is not to be made If this minimum distance cannot be observed, the top operational until the catchment area has settled and is side and side surface of the tank facing the tree must green again.
  • Seite 31 Notizen/Notes...
  • Seite 32 Our verbal and written advice with regard to usage is based as nothing else has been agreed upon with REHAU in writing. on years of experience and standardised assumptions and is This shall also apply for all warranty claims, with the warranty provided to the best of our knowledge.

Inhaltsverzeichnis