Maintenance And Cleaning; Technical Data; Operation - Conrad 55 13 10 Bedienungsanleitung

Do not point the front with the radiating infrared heat towards sensitive/quality
surfaces (i.e. furniture), as this may result in discoulorations.
Never cover the heater, do not put clothing items or other objects on top of the
heater. Fire hazard!.
• The infrared radiation outlet grid becomes very hot when heated, risk of burns!
• Never pour any liquids on or next to the product. It can cause fi re or perilous
electric shock danger. If liquids get into the device, immediately isolate the mains
socket (fuse/circuit breaker/earth leakage circuit breaker), then separate the mains
plug from the mains socket and consult an expert. Do not operate the device any-
more.
• Only move, transport or store the product when it has cooled down completely.
First disconnect it from the mains voltage, pull the plug out of the power socket.
• Only use the appliance in a moderate climate, never in a tropical climate.
• The use of this product is not recommended for persons with reduced responsive-
ness or persons with physically/mentally restricted capabilities.
• If you have any questions that are not answered in this manual, please contact our
technical service or another specialist.
Controls
1 Rotary knob for operating mode (Off, 400/800 W)
2 Foldable stand
3 Carrying handle
4 Outlet of infrared radiation
5 Safety switch (on the bottom)

Operation

Refer to the chapter "Safety Instructions" and all other information in this operating
manual!
• Move the rotary knob (1) to the position "0" (switched off).
• Fold out the stand (2) and install the heater on a suitably level, horizontal, even, stable sur-
face. Always leave suffi cient space (at least 1.5 m) from combustible or fl ammable materials
or objects (i.e. curtains, doors, furniture etc.).
• Plug the mains plug of the heater into a earthing contact socket.
Choose operating mode
Use the rotary knob (1) to select the desired function.
0 Heater switched off
1 Heating output level 1 (400 W)
2 Heating output level 2 (800 W)
Safety switch
The safety switch (5) at the bottom of the heater automatically switches off the heater when it
is lifted off the fl oor or when it tips/falls over.
Storage
If you do not need the heater for an extended period of time, switch it off (switching position "0")
and pull the mains plug from the mains socket.
Let the heater cool down completely. Fold the standard (2) forwards and store the heater in a
clean, dry location.

Maintenance and Cleaning

• Only a professional repair shop should attempt to maintain or repair the device. The product
contains no parts that require servicing. Therefore, do not open/dismantle it.
• The heater must be switched off before cleaning. Furthermore, disconnect the mains plug
from the mains socket. Next, let the heater cool down completely!
• To clean the outside of the product, a dry, soft and clean cloth is suffi cient.
• Dust can easily be removed using a clean, soft and long-haired brush and a vacuum cleaner.
Do not use abrasive cleaning agents, cleaning alcohol or other chemical solutions,
since these could damage the housing or even impair operation.
Disposal
Dispose of the unserviceable product according to the relevant statutory regulations!

Technical Data

☞
Variations in dimensions and weight are dependent on the production technique.
Operating voltage .........................220 - 240 V/AC, 50 Hz
Heating output ..............................400/800 W
Ambient temperature ....................0 °C to +40 °C
Ambient air humidity .....................0% to 80% relative air humidity, not condensing
Dimensions (H x W x D) ...............395 x 265 x 185 mm
Weight ..........................................950 g (incl. cable)
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1,
D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfi lming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
© Copyright 2011 by Conrad Electronic SE.