Herunterladen Inhalt Inhalt Diese Seite drucken
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 25
Technical Support and E-Warranty Certificate
www.vevor.com/support
Charger Station Box
Product Description
Material: ST5 725-XSS
we continue to be committed to provide you tools with competitive price.
"Save Half", "Half price" or anyother similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brand s and does not necessarily mean to c over all categories of tools offered by us. You
arE Kindly reminded to verify carefully when you are placing an order with us if you arE
actually saving half in comparison with the top major brands.
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für VEVOR ST5 725-XSS

  • Seite 1 Charger Station Box Product Description Material: ST5 725-XSS we continue to be committed to provide you tools with competitive price. "Save Half", "Half price" or anyother similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brand s and does not necessarily mean to c over all categories of tools offered by us.
  • Seite 3 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
  • Seite 4 Electrical Enclosure ③ ④ ⑥ ⑤ ② ⑦ ① ⑧ ⑩ ⑨ Box body Lock Custom wall hanger Installation plate Hinge Support frame Guide rail Blue plastic winding post Grounding wire Door panel Black protective lines - 2 -...
  • Seite 5: Specification Data

    The working temperature should be lower than 80°C, otherwise, it could lead to damage to the painting surface and the failure of sealing. SPECIFICATION DATA Model ST5 725-XSS Height*Width*Depth (mm) 700*500*250mm Color High Gloss White (PW-12224), Orange Red Wrinkle (PKR-32223)
  • Seite 6: Installation Steps

    INSTALLATION STEPS 1:Four simple steps,Set your own password. (1)The push button on the photo (2)When you start setting your showed position before set password, push the push button to password, the origin a password is the photo showed new Position 0000 please.
  • Seite 7 (5)How to retrieve the forgotten password. Unscrew the screw s to re move the sea from the back of the lock code device box. Counter-clockwise rotating dense code wheels locate white codes a gap in the axle. When the four gaps are facing up as the same time,It's a forgotten password.
  • Seite 8 2:Mounting Plate Installation Adopts 4pcs M8 hex head flange nut assembly mounting plate with enclosure body. Notice:already assembled on enclosure body when ex-factory. MOUNTING PLATE BODY 3:Wall Mounting Brackets Installation First align the rain cap hole with the enclosure backside holes,Adopts 4pcs M8*16mm hex head bolt, M8 O-ring, M8 nuts fix the rain cap and 4pcs wall mounting brackets on the enclosure,then fix the enclosure on the wall via the 4pcs wall mounting brackets.
  • Seite 9 4:Grounding wire Installation Adopts 2pcs M6 hex head flange nut assembly grounding wire on M6*12mm copper bolt of enclosure door and enclosure body. Notice:already assembled on enclosure body when ex-factory. BODY GROUNDING COPPER WIRE COPPER BOLT BOLT Made In China - 7 -...
  • Seite 10 Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX E-CrossStu GmbH...
  • Seite 12 Technical Support and E-Warranty Certificate www.vevor.com/support...
  • Seite 13: Description Du Produit

    Assistance   t echnique   e t   c ertificat   d e   garantie   électronique :   w ww.vevor.com/support Boîtier   d e   s tation   d e   r echarge Description   d u   p roduit Matériau :   S T5   7 25­XSS Nous   r estons   d éterminés   à    v ous   f ournir   d es   o utils   à    d es   p rix  ...
  • Seite 15: Boîtier Électrique

    A ssistance   t echnique   e t   c ertificat   d e   g arantie   é lectronique   www.vevor.com/support Voici   l e   m ode   d 'emploi   o riginal.   V euillez   l ire   a ttentivement   t outes   l es   i nstructions   d u   manuel   a vant   u tilisation.   V EVOR   s e   r éserve   l e   d roit   d 'interpréter   c e   m anuel   à    s a   g uise.  ...
  • Seite 16 Boîtier   électrique    Corps   d e   boîte Verrouillage Support   m ural   p ersonnalisé Clé Plaque   d'installation Charnière Rail   d e   g uidage Cadre   d e   s upport poteau   d 'enroulement   e n   p lastique   b leu Fil   d e   m ise   à    l a   t erre Lignes  ...
  • Seite 17 DES   Q UESTIONS   R EQUIÈRENT   D E   L'ATTENTION Attention :   l e   boîtier/l’armoire   e st   r evêtu(e)   u niquement   e t   n ’est   P AS   i solé(e).   S eul   u n   é lectricien   q ualifié   e st   habilité   à    i ntervenir   s ur   l es   c ircuits   e t   l es   c omposants   é lectriques   i nternes.   D es   é tiquettes   d’avertissement  ...
  • Seite 18: Étapes D 'Installation

    ÉTAPES   D 'INSTALLATION 1 :   Q uatre   é tapes   s imples,   d éfinissez   v otre   p ropre   m ot   d e   passe. (1)   L e   b outon­poussoir   s ur   l a   p hoto   i ndiquait   s a   (2)   L orsque   v ous   c ommencez   à    p aramétrer   v otre position  ...
  • Seite 19 (5)Comment   r écupérer   l e   m ot   d e   p asse   o ublié. Dévissez   l es   v is   p our   r etirer   l a   c oque   s ituée   à    l 'arrière   d u   b oîtier   d u   d ispositif   d e   v errouillage   p ar   code.
  • Seite 20 2 :   I nstallation   d e   l a   p laque   d e   m ontage Utilise   u ne   p laque   d e   m ontage   a vec   4    é crous   à    b ride   à    t ête   h exagonale   M 8   e t   u n   c orps   de  ...
  • Seite 21 4:   I nstallation   d u   f il   d e   m ise   à    l a   terre   A dopte   2    p ièces   M 6   é crou   à    b ride   à    t ête   h exagonale   f il   d e   m ise   à    l a   terre  ...
  • Seite 22: Australie

    Fabricant: Shanghai   m uxinmuyeyouxiangongsi Adresse :   S huangchenglu   8 03nong11hao1602A­1609shi,   B aoshanqu,   S hanghai   2 00000   Importé   e n   A ustralie :   S IHAO   P TY   L TD.   1    R OKEVA   S TREET,   E STWOOD   N SW   2 122,   Australie Importé   a ux   É tats­Unis :   S anven   T echnology   L td.,   S uite   2 50,   9 166   A naheim Rancho  ...
  • Seite 24 Assistance   t echnique   e t   c ertificat   d e   g arantie   électronique :   w ww.vevor.com/support...
  • Seite 25: Produktbeschreibung

    Garantiezertifikat: www.vevor.com/support Ladestation Produktbeschreibung Material: ST5 725-XSS Wir sind weiterhin bestrebt, Ihnen Werkzeuge zu wettbewerbsfähigen Preisen anzubieten. „50 % sparen“, „halber Preis“ oder ähnliche Ausdrücke stellen lediglich eine Schätzung der möglichen Einsparungen dar, die Sie beim Kauf bestimmter Werkzeuge bei uns im Vergleich zu führenden Marken erzielen könnten.
  • Seite 27 Dies ist die Originalanleitung. Bitte lesen Sie die gesamte Bedienungsanleitung vor der Inbetriebnahme sorgfältig durch. VEVOR behält sich die Auslegung der Bedienungsanleitung vor. Das Aussehen des Produkts kann von dem gelieferten Produkt abweichen. Wir bitten um Verständnis, dass wir Sie nicht erneut über etwaige Technologie- oder Software-Updates informieren werden.
  • Seite 28 Elektrischer Schrank ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ Sperren Kastenrahmen Individuell gestalteter Wandaufhänger Schlüssel Montageplatte Scharnier Führungsschiene Stützrahmen Blauer Kunststoff-Wickelpfosten Erdungsdraht Türverkleidung Schwarze Schutzlinien - 2 -...
  • Seite 29 Schäden wird jedoch abgeraten. Die Arbeitstemperatur sollte unter 80°C liegen, da es sonst zu Schäden an der Lackoberfläche und zum Versagen der Abdichtung kommen kann. SPEZIFIKATIONSDATEN Modell ST5 725-XSS 700 x 500 x 250 mm Höhe*Breite*Tiefe (mm) Farbe Hochglanzweiß (PW-12224), Orangerot-Kräusellack (PKR-32223) Körpermaterial...
  • Seite 30: Installationsschritte

    INSTALLATIONSSCHRITTE 1: In vier einfachen Schritten können Sie Ihr eigenes Passwort festlegen. (1) Der auf dem Foto abgebildete Druckknopf (2)Wenn Sie mit dem Einstellen Ihrer zeigte seine Position vor dem Einstellen. Passwort, drücken Sie den Knopf, bis das Foto Passwort, der Ursprung eines Passworts die neue Position anzeigte ist 0000 Bitte.
  • Seite 31 (5)Wie Sie Ihr vergessenes Passwort wiederherstellen. Lösen Sie die Schraube s, um das Gehäuse von der Rückseite des Schließcode-Gerätekastens zu entfernen. Gegen den Uhrzeigersinn rotierende, dicht codierte Räder lokalisieren weiße Codes in einer Lücke in der Achse. Wenn die vier Lücken gleichzeitig nach oben zeigen, handelt es sich um einen vergessenen Code. Passwort.
  • Seite 32 2: Montage der Montageplatte Verwendet 4 Stück M8 Sechskant-Flanschmutter-Montageplatten mit Gehäusekörper. Hinweis: Bereits ab Werk am Gehäuse montiert. MONTAGE PLATTE KASTEN KÖRPER 3: Montage der Wandhalterungen Richten Sie zunächst die Öffnung der Regenkappe an den Öffnungen auf der Gehäuserückseite aus. Verwenden Sie 4 M8*16mm Sechskantschrauben, einen M8 O-Ring und M8 Muttern, um die Regenkappe und 4 Wandhalterungen am Gehäuse zu befestigen.
  • Seite 33 4: Die Erdungsdrahtinstallation verwendet 2 Stück M6 Sechskant-Flanschmutter-Baugruppen zur Erdung des Drahtes an M6*12mm Kupferbolzen der Gehäusetür und des Gehäusekörpers. Hinweis: Bereits ab Werk am Gehäuse montiert. NUSS KASTEN KÖRPER ERDUNG KUPFER DRAHT KUPFER BOLZEN BOLZEN In China hergestellt - 7 -...
  • Seite 34 Hersteller: Shanghai muxinmuyeyouxiangongsi Adresse: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 Importiert nach Australien: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122, Australien Importiert in die USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Ort, Rancho Cucamonga, CA 91730 YH CONSULTING LIMITED. C/O YH Consulting Limited, Büro 147, Centurion House, London Straße, Staines-upon-Thames, Surrey, TW18 4AX E-CrossStu GmbH...
  • Seite 36 Technischer Support und elektronisches Garantiezertifikat: www.vevor.com/support...
  • Seite 37 Supporto tecnico e certificato di garanzia elettronica www.vevor.com/support Stazione di ricarica Box Descrizione del prodotto Materiale: ST5 725- continuiamo a impegnarci per fornirvi strumenti a prezzi competitivi. "Risparmia la metà", "Metà prezzo" o altre espressioni simili da noi utilizzate rappresentano...
  • Seite 39 Queste sono le istruzioni originali, si prega di leggere attentamente tutte le istruzioni del manuale prima dell'uso. VEVOR si riserva la piena interpretazione del proprio manuale utente. L'aspetto del prodotto dipenderà dal prodotto ricevuto. Vi preghiamo di scusarci se non vi informeremo più...
  • Seite 40 Quadro elettrico ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ Serratura Corpo scatolato Appendiabiti da parete personalizzato Chiave Piastra di installazione Cerniera Guida di scorrimento Telaio di supporto Perno di avvolgimento in plastica blu filo di messa a terra Linee protettive nere Pannello della porta - 2 -...
  • Seite 41 La temperatura di lavorazione deve essere inferiore a 80°C, altrimenti si potrebbero danneggiare la superficie verniciata e compromettere la sigillatura. DATI DI SPECIFICA Modello ST5 725-XSS 700*500*250mm Altezza*Larghezza*Profondità (mm) Colore Bianco lucido (PW-12224), Rosso arancio raggrinzante (PKR-32223)
  • Seite 42 FASI DI INSTALLAZIONE 1: Quattro semplici passaggi: imposta la tua password. (1)Il pulsante sulla foto mostrava la (2)Quando inizi a impostare il tuo posizione prima dell'impostazione password, premere il pulsante per la foto password, l'origine di una password è mostrata nuova posizione 0000 favore.
  • Seite 43 (5)Come recuperare la password dimenticata. Svitare le viti per rimuovere il sigillo dal retro della scatola del dispositivo di codice blocco. Le ruote a codice denso che ruotano in senso antiorario individuano i codici bianchi in uno spazio vuoto nell'asse. Quando i quattro spazi vuoti sono rivolti verso l'alto contemporaneamente, è un errore dimenticato. password.
  • Seite 44 2: Installazione della piastra di montaggio Adotta 4 piastre di montaggio con dado flangiato a testa esagonale M8 con corpo di contenimento. Nota: già assemblato sul corpo dell'involucro in fabbrica. MONTAGGIO PIATTO SCATOLA CORPO 3: Installazione delle staffe di montaggio a parete Per prima cosa allineare il foro del tappo antipioggia con i fori posteriori dell'involucro.
  • Seite 45 4: Installazione del filo di messa a terra Adotta 2 dadi flangiati a testa esagonale M6 per il filo di messa a terra sul bullone di rame M6*12mm della porta e del corpo dell'involucro. Nota: già assemblato sul corpo dell'involucro in fabbrica.
  • Seite 46 Produttore: Shanghai muxinmuyeyouxiangongsi Indirizzo: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Luogo, Rancho Cucamonga, CA 91730 YH CONSULTING LIMITED. C/O YH Consulting Limited RAPPRESENTANZA DEL REGNO UNITO Ufficio 147, Centurion House, Londra Strada, Staines-upon-Thames, Surrey, TW18 4AX...
  • Seite 48 Supporto tecnico e certificato di garanzia elettronica www.vevor.com/support...
  • Seite 49: Descripción Del Producto

    Soporte   t écnico   y    c ertificado   d e   garantía   electrónica:   w ww.vevor.com/support Caja   d e   e stación   d e   c arga Descripción   d el   P roducto Material:   S T5   7 25­XSS Seguimos   c omprometidos   a    o frecerle   h erramientas   a    p recios  ...
  • Seite 51 Soporte   t écnico   y    c ertificado   d e   g arantía   e lectrónica   www.vevor.com/support Estas   s on   l as   i nstrucciones   o riginales.   L ea   a tentamente   t odas   l as   i nstrucciones   d el   manual   a ntes   d e   u sar   e l   p roducto.   V EVOR   s e   r eserva   e l   d erecho   d e   i nterpretar   e ste   m anual   d e  ...
  • Seite 52 Caja   eléctrica    Cerrar Cuerpo   d e   caja Llave colgador   d e   p ared   p ersonalizado Placa   d e   instalación Bisagra Riel   g uía Estructura   d e   s oporte poste   d e   b obinado   d e   p lástico   a zul Cable  ...
  • Seite 53 ASUNTOS   Q UE   R EQUIEREN   ATENCIÓN Advertencia:   La   c aja/armario   d e   p rotección   s olo   t iene   r evestimiento,   p ero   N O   e stá   a islado.   S olo   u n   electricista   c ualificado   p uede   m anipular   l os   c ircuitos   y    c omponentes   e léctricos   i nternos.   S i   fuera  ...
  • Seite 54 PASOS   D E   I NSTALACIÓN 1:   C uatro   s encillos   p asos,   E stablece   t u   p ropia   contraseña. (1)   E l   b otón   p ulsador   d e   l a   f oto   m ostraba   l a   (2)Cuando   e mpieces   a    c onfigurar   t u posición  ...
  • Seite 55 (5)Cómo   r ecuperar   l a   c ontraseña   o lvidada. Desenrosque   l os   t ornillos   p ara   r etirar   e l   s ello   d e   l a   p arte   p osterior   d e   l a   c aja   d el   d ispositivo   d e   código  ...
  • Seite 56 2:   I nstalación   d e   l a   p laca   d e   m ontaje Adopta   u na   p laca   d e   m ontaje   c on   c onjunto   d e   t uerca   d e   b rida   d e   c abeza   h exagonal   M 8   d e   4    p iezas   con  ...
  • Seite 57 4:   I nstalación   d el   c able   d e   p uesta   a    tierra   A dopta   2    p iezas   d e   t uerca   d e   b rida   d e   c abeza   h exagonal   M 6   p ara   e l   c able   d e   puesta  ...
  • Seite 58 Fabricante: Shanghai   m uxinmuyeyouxiangongsi Dirección:   S huangchenglu   8 03nong11hao1602A­1609shi,   B aoshanqu,   S hanghai   2 00000   Importado   a    A ustralia:   S IHAO   P TY   L TD.   1    R OKEVA   S TREET,   E ASTWOOD   N SW   2 122,   Australia Importado   a    E E.   U U.:   S anven   T echnology   L td.   S uite   2 50,   9 166   A naheim Lugar:  ...
  • Seite 60 Soporte   t écnico   y    c ertificado   d e   g arantía   electrónica:   w ww.vevor.com/support...
  • Seite 61: Opis Produktu

    Stacja ładująca Box Opis produktu Materiał: ST5 725-XSS nadal staramy się dostarczać Państwu narzędzia po konkurencyjnych cenach. „Oszczędź połowę”, „Połowa ceny” lub inne podobne wyrażenia używane przez nas stanowią jedynie szacunkowe oszczędności, jakie możesz uzyskać, kupując u nas określone narzędzia w porównaniu z produktami czołowych marek i niekoniecznie oznaczają...
  • Seite 63 To jest oryginalna instrukcja obsługi. Przed użyciem prosimy o dokładne zapoznanie się z treścią instrukcji. Firma VEVOR zastrzega sobie prawo do jednoznacznej interpretacji niniejszej instrukcji obsługi. Wygląd produktu zależy od stanu, w jakim go otrzymali Państwo.
  • Seite 64 Obudowa elektryczna Zamek Nadwozie skrzyniowe Wieszak ścienny na zamówienie Klawisz Płyta montażowa Zawias Rama nośna Szyna prowadząca Niebieski plastikowy słupek nawijający Przewód uziemiający Panel drzwiowy Czarne linie ochronne - 2 -...
  • Seite 65 Temperatura robocza powinna być niższa niż 80°C, w przeciwnym razie może dojść do uszkodzenia powierzchni lakierowanej i utraty szczelności. DANE SPECYFIKACYJNE Model ST5 725-XSS 700*500*250 Wysokość*Szerokość*Głębokość (mm) Kolor Biały o wysokim połysku (PW-12224), Pomarańczowo-czerwony zmarszczony (PKR-32223) Materiał korpusu RAL9016 (biały o wysokim połysku)
  • Seite 66 KROKI INSTALACJI 1: Cztery proste kroki. Ustaw własne hasło. (1) Przycisk na zdjęciu pokazuje pozycję (2)Kiedy zaczniesz ustawiać swoje przed ustawieniem hasło, naciśnij przycisk, aby wyświetlić hasło, oryginalne hasło to 0000 zdjęcie nowej pozycji Proszę. (3)Jeśli chcesz, ustaw nowe, (4)Po wprowadzeniu nowego hasła czterobitowe hasło i zapamiętaj je.
  • Seite 67 (5)Jak odzyskać zapomniane hasło. Odkręć śruby, aby usunąć morze z tyłu obudowy urządzenia z kodem blokady. Obracające się przeciwnie do ruchu wskazówek zegara koła kodowe z gęstym kodem lokalizują białe kody w szczelinie w osi. Gdy cztery szczeliny są skierowane do góry w tym samym czasie, to jest to zapomniane.
  • Seite 68: Montaż Uchwytów Ściennych

    2: Montaż płyty montażowej Zestaw zawiera 4 sztuki nakrętki kołnierzowej z łbem sześciokątnym M8, płytę montażową i obudowę. Uwaga: elementy są już zamontowane na obudowie w fabryce. MONTOWANIE PŁYTA SKRZYNKA CIAŁO 3: Montaż uchwytów ściennych Najpierw należy wyrównać otwór osłony przeciwdeszczowej z otworami w tylnej części obudowy. Następnie należy przymocować...
  • Seite 69 4: Instalacja przewodu uziemiającego. Przyjmuje 2 sztuki nakrętki kołnierzowej z łbem sześciokątnym M6, przewód uziemiający na śrubie miedzianej M6*12 mm na drzwiach obudowy i korpusie obudowy. Uwaga: elementy są już zamontowane na obudowie w fabryce. NAKRĘTKA SKRZYNKA CIAŁO GRUNT MIEDŹ DRUT MIEDŹ...
  • Seite 70 Producent: Szanghaj muxinmuyeyouxiangongsi Adres: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Szanghaj 200000 CN. Importowane do Australii: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Importowane do USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Miejsce, Rancho Cucamonga, CA 91730 YH CONSULTING LIMITED. C/O YH Consulting Limited Biuro REP WIELKIEJ BRYTANII 147, Centurion House, Londyn...
  • Seite 72 Wsparcie techniczne i certyfikat gwarancji elektronicznej www.vevor.com/support...
  • Seite 73 Laadstationbox Productomschrijving Materiaal: ST5 725-XSS Wij blijven ons inzetten om u gereedschappen te leveren tegen concurrerende prijzen. "Bespaar de helft", "halve prijs" of andere soortgelijke uitdrukkingen die wij gebruiken, geven slechts een schatting van de besparingen die u kunt behalen door bepaalde gereedschappen bij ons te kopen in vergelijking met de grote topmerken en omvatten niet noodzakelijkerwijs alle categorieën gereedschappen die...
  • Seite 75 Dit is de originele handleiding. Lees alle instructies zorgvuldig door voordat u het product gebruikt. VEVOR behoudt zich het recht voor om de gebruiksaanwijzing duidelijk te interpreteren. Het uiterlijk van het product is afhankelijk van het product dat u hebt ontvangen.
  • Seite 76 Elektrische behuizing ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ Slot Dooscarrosserie Aangepaste wandhanger Sleutel Installatieplaat Scharnier Geleiderail Ondersteuningsframe Blauwe kunststof wikkelpaal Aardingsdraad Deurpaneel Zwarte beschermlijnen - 2 -...
  • Seite 77: Zaken Hebben Aandacht

    De werktemperatuur moet lager zijn dan 80°C, anders kan er schade aan het te schilderen oppervlak ontstaan en kan de afdichting mislukken. SPECIFICATIEGEGEVENS Model ST5 725-XSS 700*500*250mm Hoogte*Breedte*Diepte (mm) Kleur Hoogglans wit (PW-12224), oranjerood rimpel (PKR-32223)
  • Seite 78: Installatiestappen

    INSTALLATIESTAPPEN 1: Vier eenvoudige stappen: Stel uw eigen wachtwoord (1)De drukknop op de foto toonde de positie (2)Wanneer u begint met het instellen van uw vóór de instelling wachtwoord, druk op de drukknop om de foto te wachtwoord, de oorsprong van een wachtwoord is tonen nieuwe positie 0000 Alsjeblieft.
  • Seite 79 (5)Hoe u uw vergeten wachtwoord kunt opvragen. Draai de schroeven los om het zegel aan de achterkant van de vergrendelcodekast te verwijderen. Tegen de klok in draaiende, dichte codewielen lokaliseren witte codes in een opening in de as. Wanneer de vier openingen tegelijkertijd omhoog wijzen, is het een vergeten code. wachtwoord.
  • Seite 80 2: Montageplaatinstallatie Geschikt voor montageplaat met 4 M8 zeskantflensmoeren en behuizing. Let op: reeds gemonteerd op de behuizing wanneer deze af fabriek wordt geleverd. MONTAGE BORD DOOS LICHAAM 3: Installatie van wandmontagebeugels Lijn eerst het gat van de regenkap uit met de gaten in de achterkant van de behuizing. Gebruik 4 M8*16mm zeskantbouten, een M8 O-ring en M8 moeren om de regenkap en 4 wandmontagebeugels op de behuizing te bevestigen.
  • Seite 81: Gemaakt In China

    4: Installatie van aardingsdraad Gebruikt 2 stuks M6 zeskantflensmoer aardingsdraad op M6*12mm koperen bout van de behuizingsdeur en behuizingsbehuizing. Let op: reeds gemonteerd op de behuizing wanneer deze af fabriek wordt geleverd. MOER DOOS LICHAAM AARDING KOPER DRAAD KOPER BOUT BOUT Gemaakt in China - 7 -...
  • Seite 82 Fabrikant: Shanghai muyeyouxiangongsi Adres: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 Geïmporteerd naar AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australië Geïmporteerd naar de VS: Sanven Technology Ltd. Suite 250, 9166 Anaheim Plaats, Rancho Cucamonga, CA 91730 YH CONSULTING LIMITED. C/O YH Consulting Limited Kantoor 147, Centurion House, Londen Weg, Staines-upon-Thames, Surrey, TW18 4AX E-CrossStu GmbH...
  • Seite 84 Technische ondersteuning en e- garantiecertificaat www.vevor.com/support...
  • Seite 85 Laddstationsbox Produktbeskrivning Material: ST5 725-XSS Vi fortsätter att sträva efter att förse dig med verktyg till konkurrenskraftiga priser. "Spara hälften", "Halv priset" eller andra liknande uttryck som används av oss representerar endast en uppskattning av de besparingar du kan göra genom att köpa vissa verktyg hos oss jämfört med de stora toppmärkena och betyder inte nödvändigtvis att det täcker alla kategorier av verktyg som...
  • Seite 87 Detta är originalinstruktionerna, vänligen läs alla instruktioner noggrant innan du använder produkten. VEVOR förbehåller sig en tydlig tolkning av vår användarmanual. Produktens utseende ska vara beroende av den produkt du mottagit. Vi ber om ursäkt för att vi inte kommer att informera dig igen om det finns några teknik- eller programuppdateringar för vår produkt.
  • Seite 88 Elektrisk kapsling ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ Låsa Lådkaross Anpassad vägghängare Nyckel Installationsplatta Gångjärn Styrskena Stödram Blå plastlindningsstolpe Jordningstråd Dörrpanel Svarta skyddslinjer - 2 -...
  • Seite 89 Men det rekommenderas inte vid målning av större skador. Arbetstemperaturen bör vara lägre än 80 °C, annars kan det leda till skador på målningsytan och att förseglingen inte fungerar. SPECIFIKATIONSDATA Modell ST5 725-XSS 700*500*250mm Höjd*Bredd*Djup (mm) Färg Högblank vit (PW-12224), Orangeröd rynkad (PKR-32223) Kroppsmaterial RAL9016 (högblank vit)
  • Seite 90: Fyra Enkla Steg, Ställ In Ditt Eget

    INSTALLATIONSSTEG 1: Fyra enkla steg, Ställ in ditt eget lösenord. (1) Tryckknappen på fotot visade positionen (2) När du börjar ställa in din före inställningen lösenord, tryck på tryckknappen tills fotot lösenord, ursprunget för ett lösenord är 0000 visade den nya positionen behaga.
  • Seite 91 (5) Hur man återställer det glömda lösenordet. Skruva loss skruven s för att ta bort säkringen från baksidan av låskodsenhetens dosa. Motursroterande täta kodhjul lokaliserar vita koder i ett mellanrum i axeln. När de fyra mellanrummen är vända uppåt samtidigt är det en bortglömd kod. lösenord.
  • Seite 92 2: Montering av monteringsplatta Använder 4 st M8 sexkantsflänsmuttermonteringsplatta med hölje. Observera: Redan monterad på höljet vid leverans från fabrik. MONTERING TALLRIK LÅDA KROPP 3: Installation av väggfästen Rikta först in regnskyddshålet med hålen på baksidan av höljet. Använd 4 st M8*16 mm sexkantsbultar, M8 O-ringar och M8 muttrar för att fästa regnskyddet och 4 st väggfästen på...
  • Seite 93 4: Installation av jordningskabel Använder 2 st M6 sexkantsflänsmuttermontering för jordningskabel på M6*12 mm kopparbult på skåpdörr och skåpkropp. Observera: Redan monterad på höljet vid leverans från fabrik. MUTTER LÅDA KROPP GRUNDSTÖTNING KOPPAR TRÅD KOPPAR BULT BULT Tillverkad i Kina - 7 -...
  • Seite 94 Tillverkare: Shanghai muxinmuyeyouxiangongsi Adress: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 Importerad till Australien: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien Importerad till USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Plats, Rancho Cucamonga, Kalifornien 91730 YH CONSULTING LIMITED. C/O YH Consulting Limited Storbritanniens republikaner Kontor 147, Centurion House, London...
  • Seite 96 Teknisk support och e-garanticertifikat www.vevor.com/support...

Inhaltsverzeichnis