Herunterladen
Teilen
Diese Seite drucken
HP LaserJet 4100 mfp series Inbetriebnahme
  1. Anleitungen
  2. Marken
  3. HP Anleitungen
  4. All-in-One-Drucker
  5. LaserJet 4100MFP
  6. Inbetriebnahme
HP LaserJet 4100 mfp series Inbetriebnahme

HP LaserJet 4100 mfp series Inbetriebnahme

Vorschau ausblenden Andere Handbücher für LaserJet 4100 mfp series:

Werbung

Quicklinks

Diese Anleitung herunterladen

Werbung

loading

Verwandte Anleitungen für HP LaserJet 4100 mfp series

Inhaltszusammenfassung für HP LaserJet 4100 mfp series

  • Seite 2 Hewlett-Packard printer associated with this user guide. FCC regulations The HP LaserJet 4100 mfp series has been tested and found to comply with First Edition, November 2001 the limits for a Class A digital device, pursuant to Part 15 of the FCC rules.
  • Seite 3 1040 mm HP LaserJet (41 inches) 4100 mfp 415 mm (16.4 inches) HP LaserJet 4100 mfp 540 mm (21.25 inches) HP LaserJet 4101 mfp 661 mm (26 inches)
  • Seite 4 6) Cartouche de toner 7) Second bac à papier de 500 feuilles* 8) Unité d'impression recto verso* *Fournis avec le modèle HP LaserJet 4101 mfp. En option pour le modèle HP LaserJet 4100 mfp. Entfernen der inneren Verpackungselemente. 1) Entfernen Sie den Überprüfen des Lieferumfangs.
  • Seite 5 Power/Jumper cable connectors 4) Rear output slot 5) Duplexer or dust numbers) 5) Tray 2 6) Tray 1 7) Toner cartridge access (under top cover) cover 6) Parallel interface port 7) Hard disk 8) HP Jetdirect print server 8) Control panel 9) Front output bin card 9) Fast InfraRed Connect (FIR port) 10) Memory access door Identification des pièces (vue avant).
  • Seite 8 Load paper Tray 2 and optional Trays 3 and 4. 1) Pull the tray 2) To adjust the width, squeeze the lever on the left guide and slide the completely out of the product. guides into place to match the media width. 3) To adjust the length, squeeze the lever on the back media guide and slide it to the desired media size until it clicks into place.
  • Seite 11 Turn the product on. Turn the power on and wait for the product to warm Set the control panel language. Choose the language from the available up. After the product warms up, the product prompts you to set the control options.
  • Seite 12 (Nota: Se o protocolo da rede não for IP , se for outro endereço de gateway, digite-o manualmente. (Nota: Para realizar preciso mais assistência ou se você preferir utilizar configurações uma configuração remota, consulte o suporte em www.hp.com.) remotas, entre em contato com o suporte em www. hp.com.)
  • Seite 13 Set the e-mail gateway addresses manually. 1) Select SMTP Test the digital sending function. 1) To verify that the product is GATEWAY, in the I/O menu and enter the gateway address. 2) Select connected to the network server, you can test the digital sending function LDAP GATEWAY, in the I/O menu and enter the gateway address.
  • Seite 14 Install the printing software (optional). Procedures for installing the Congratulations. You can now use the HP LaserJet 4100 mfp series for software vary according to operating system and network environment. printing, copying, color scanning, and digital sending. Refer to the Use guide, and follow the procedure that matches your system and environment.
  • Seite 16 © 2001 Hewlett-Packard Company http://www.hp.com/support/lj4100mfp *C9148 -90902 *C9148 -90902 C9148-90902...