AlzaPower APW-SHRIPdB21 Benutzerhandbuch Seite 7

INSTRUCTIONS
Basic control
• Set 1 to AUTO
The shredder automatically switches on when a sheet of paper is inserted into the feed slot.
It automat.cally stops after pass.ngth
• lithe shredder Stopsworking because the paper has risen, setthe switch to REV (reverse).
• Switch between
set-tingit to REV Always stop the appliance fora whileto avoid damaging the engine.
• To tum the shredder
Automatic feeder for shredding
On the top of the shredder there is an automatic shredding feeder cover that can hold up
to IS Ad sheets of gog/m2, which the shredder then automatically
Notice Of use
This shredder is designed for short•tcrm operation. If the shredder runs for too long or
cuerheats. it will automatically shut down and you will haveto wait a few minutes for it to
cool down before resuming operation. This condition will be indicated bythe Overheat
dicator lighting
off for 60
If you load morc paper into thc shredder than the machine Canprcu:ess,the Overloadindi-
cator lights In this case.turn the snitch to REV and pull out the paper
The blades of this shredder are not designed for lubrication. DO not use Oils Or Other
lubricants.
AUTO (forward) and REV(reverse} if the paper
off, switch to OFF
After every 3 minutes of operation, the
not release simply
must be switched
ENGLISH