MYPV AC THOR Schnellstart Seite 6

04
generator is switched off by a thermostat!
If there are several sensors, the numbers are assigned in the order of selection. The
assignment can be cancelled by tapping again. To identify the sensor in the list, the serial
numbers from the label on the sensor cable are displayed, as is the current measured
value.
05
Cloud mode (optional) – internet connection is required!
If desired, the settings of the AC•THOR or AC•THOR 9s can also be accessed from outside
the local network. For this purpose, it is necessary to register the device with serial number
and device key in the my-PV Cloud: https://live.my-pv.com/
Open the website and log in or register as a new user.
When you register for the first time, you will receive an email with a confirmation link. If the
email does not appear in your inbox, it may be in the spam folder.
If you already have a user profile from previous versions of the my-PV Cloud, it will still be
valid in the new cloud. In addition, you automatically have full access to all devices that you
have already integrated previously.
The serial number and the device key can be found under Settings > Cloud Connection
If the cloud mode is activated during this comissioning step, an overview of the recorded
operating data is also available after connecting the device to the my-PV Cloud.
You activate the cloud mode under Settings > Cloud Mode
my-PV
WiFi Meter
Temperature sensor assignment and activation
By tapping on the list entry, a number appears at the end of
the line. Then the setting must be saved (floppy disc symbol
on the right).
The use of a sensor is not necessary if the optional boost
backup or the legionella program are not used and the heat
Compatible
manufacturers
my-PV Cloud